Taperssection.com

Gear / Technical Help => Cables => Topic started by: adamz on July 22, 2011, 05:29:48 PM

Title: I need a custom cable please
Post by: adamz on July 22, 2011, 05:29:48 PM
It's been a while since I've been at the forum and am in need.
I am using a headphone out signal source to feed a monitor and also the board. There's no other signal outputs avail on the unit.

I need a splitter cable made up with:

 a 1/4" stereo male plug (for the headphone source) that splits as close to the plug as possible to:
 -a 6 foot cable length terminating at an XLR male (for the board)
and
- a 6 foot cable length terminating at a 1/4" male mono (for the monitor)

Split the stereo plug left/right to the XLR or the 1/4" mono, it don't matter as long as each one gets a channel.

Middle of the road quality wise, no cheap ass parts wanted, nor platinum plated needed. Black Canare cable and Neutrik plugs are great.
email me at akg451ck8@yahoo.com.
Thanks
Adam Z
Title: Re: I need a custom cable please
Post by: F.O.Bean on July 22, 2011, 08:05:43 PM
PM Ted Gakitis(sp?) or Darktrain!
Title: Re: I need a custom cable please
Post by: Neilyboy on August 12, 2011, 12:51:17 PM
;)
http://www.radioshack.com/product/index.jsp?productId=2062728

or pm Ted or Robb as mentioned above haha.

Ted: http://taperssection.com/index.php?action=pm;sa=send;u=19317
Robb: http://taperssection.com/index.php?action=pm;sa=send;u=17532

Neil
Title: Re: I need a custom cable please
Post by: darktrain on August 12, 2011, 05:43:07 PM
Already done and delivered:)
Title: Re: I need a custom cable please
Post by: F.O.Bean on August 13, 2011, 12:32:43 AM
Quote from: darktrain on August 12, 2011, 05:43:07 PM
Already done and delivered:)

Good man Robb :) I LOVE all of my Darktrain cables. In fact, I ONLY run/use your cables, Robb :) They are TOP-NOTCH ;D 8)
Title: Re: I need a custom cable please
Post by: adamz on January 04, 2014, 05:17:35 PM
Great cable, thanks. I never posted here that all is good and awesome.
AZ