Become a Site Supporter and Never see Ads again!

Author Topic: V2 > SBM-1 ground loop when using same battery...  (Read 1516 times)

0 Members and 1 Guest are viewing this topic.

Offline ethan

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 4305
  • Gender: Male
  • Go Buffs!
    • COTapers.org
V2 > SBM-1 ground loop when using same battery...
« on: May 14, 2006, 09:55:55 AM »


Just stumbled on this yesterday. It appears that an audible ground loop occurs when I run my V2 and SBM-1 off the same eco charge battery. I had been using my line transformers with this rig so never had this problem but yesterday I ran with the V2. It was odd I'd turn off the V2 and still hear the sound so I thought my SBM-1 was starting to fail. However I noticed the sound went away when I removed the RCA's. Finally I removed the V2 from the battery an ding no sound...

Just thought I'd say something incase anyone else is running V2 > SBM-1...keep them on separate batteries.

-e
COtapers.org - "We're higher than your average taper"

 

RSS | Mobile
Page created in 0.043 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF