Become a Site Supporter and Never see Ads again!

Author Topic: AC power 4pin XLR cable for EdirolR-4pro ?  (Read 3292 times)

0 Members and 1 Guest are viewing this topic.

Offline montanamon

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
  • NeumannKM-184's (matched pair), EdirolR-4Pro (Oade
AC power 4pin XLR cable for EdirolR-4pro ?
« on: October 28, 2014, 01:45:58 PM »
Was hoping and wondering if any of our resident cable pro's has put together any AC power supplies for the R-4pro which only offers the 4pin XLR for a direct power plug-in? I have (4) 9v batteries and a 4pin XLR cable that makes that connection possible but I am in desperate need of someone to put this together for me. Contacting Roland has been a lessen in futility as they haven't been able to help.

I apoligize in advance if this thread has already been addressed specifically - i did find the thread(s) that addressed making your own and different battery options for the R-4pro but i thought i would just cut to the chase and ask, lol.

Any ideas for an easy AC power supply plug in would be greatly appreciated or someone being able to point me in the right direction.
Thanks in advance to whomever has an idea or could offer (for the cost they choose) to build it - or better yet already has....
"cheers" from Flathead Lake MT.
Montanamon
« Last Edit: October 28, 2014, 09:37:33 PM by montanamon »

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: AC power 4pin XLR cable for EdirolR-4pro ?
« Reply #1 on: October 28, 2014, 02:02:26 PM »
The R4-Pro will run on volatge between 9-16v.  You would need to get a wall-wart with that volatage and solder on a female 4 pin xlr, pin 4 for (+) pin 1 for (-).

Contact me if you would like me to build it for you.

Roland/Edirol R-4 Pro / 9-16v / 4 pin XLR Female / pin 4 for (+) pin 1 for (-)
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline montanamon

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
  • NeumannKM-184's (matched pair), EdirolR-4Pro (Oade
Re: AC power 4pin XLR cable for EdirolR-4pro ?
« Reply #2 on: October 28, 2014, 02:30:54 PM »
The R4-Pro will run on volatge between 9-16v.  You would need to get a wall-wart with that volatage and solder on a female 4 pin xlr, pin 4 for (+) pin 1 for (-).

Contact me if you would like me to build it for you.

Roland/Edirol R-4 Pro / 9-16v / 4 pin XLR Female / pin 4 for (+) pin 1 for (-)

Sent you a PM ;) thank you!

Offline H₂O

  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 5745
  • Gender: Male
Re: AC power 4pin XLR cable for EdirolR-4pro ?
« Reply #3 on: October 28, 2014, 03:46:31 PM »
I have made these using off the shelf 12v walwarts that can be had off ebay for ~ $15 new
Music can at the least least explain you and at the most expand you
LMA Recordings

List

Offline montanamon

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 11
  • NeumannKM-184's (matched pair), EdirolR-4Pro (Oade
Re: AC power 4pin XLR cable for EdirolR-4pro ?
« Reply #4 on: November 08, 2014, 10:53:19 AM »
The R4-Pro will run on volatge between 9-16v.  You would need to get a wall-wart with that volatage and solder on a female 4 pin xlr, pin 4 for (+) pin 1 for (-).

Contact me if you would like me to build it for you.

Roland/Edirol R-4 Pro / 9-16v / 4 pin XLR Female / pin 4 for (+) pin 1 for (-)!!

For any of you who may need a cable built - Ted did a fantastic job!! Works perfectly, looks perfect and I can't thank you enough!!
I would highly recommend Ted for anyone that is in need of a specific cable!! Plus he's a class act :) THANK YOU TED
"cheers" from MT

 

RSS | Mobile
Page created in 0.063 seconds with 33 queries.
© 2002-2024 Taperssection.com
Powered by SMF