Become a Site Supporter and Never see Ads again!

Author Topic: Littlebox Power Question  (Read 5045 times)

0 Members and 1 Guest are viewing this topic.

Offline chinariderstl

  • Trade Count: (43)
  • Taperssection All-Star
  • ****
  • Posts: 1260
  • Gender: Male
    • https://chris-finn.com/
Littlebox Power Question
« on: September 15, 2012, 04:05:36 PM »
Hi, I tried to PM Jon directly, but, apparently cannot, so I'll pose the question to the community instead.  I just picked up a 5400 mah DVD battery from a local taper (thanks Roger) to power my Littlebox via a Din3 cable Ted made.  The Littlebox also has a four AA battery sled.  I was not going to use AA power, but am curious, if I were to plug in the batteries along with the DVD battery, would there be potential for overload / damage?  Is there also potential for redundant power?  If so, what source would take precedence?
Mics: Audio-Technica AT853's, Avantone CK-40 (Busman mod), Busman BSC1's, DPA 4022's, DPA 4060's
Pres: Apogee Mini-MP, Core Sound Battery Box
Decks: Sony PCM-M10, Tascam DR-2D, Tascam DR-680 (Busman mod)
Power: Initial RB-270, Naztech PB15000
LMA: http://www.archive.org/search.php?query=taper%3A%22Chris+Finn%22

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: Littlebox Power Question
« Reply #1 on: September 15, 2012, 04:21:53 PM »
No danger of overload or anything.

With other equipment, most commonly the external source provides the power until it is depleted and then the internal batteries take over.

Jon doesn't do PM's. To e-mail him your question, find a post by Jon Stoppable and click on the little envelope below his trade count.
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline chinariderstl

  • Trade Count: (43)
  • Taperssection All-Star
  • ****
  • Posts: 1260
  • Gender: Male
    • https://chris-finn.com/
Re: Littlebox Power Question
« Reply #2 on: September 15, 2012, 05:07:38 PM »
Awesome, thanks!
Mics: Audio-Technica AT853's, Avantone CK-40 (Busman mod), Busman BSC1's, DPA 4022's, DPA 4060's
Pres: Apogee Mini-MP, Core Sound Battery Box
Decks: Sony PCM-M10, Tascam DR-2D, Tascam DR-680 (Busman mod)
Power: Initial RB-270, Naztech PB15000
LMA: http://www.archive.org/search.php?query=taper%3A%22Chris+Finn%22

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Re: Littlebox Power Question
« Reply #3 on: September 16, 2012, 08:36:04 AM »
I just run mine of DVD batteries!!  One DVD battery should get you at least 20 hours so unless you are at a festival I don't see a need to run internals. 

Hi, I tried to PM Jon directly, but, apparently cannot, so I'll pose the question to the community instead.  I just picked up a 5400 mah DVD battery from a local taper (thanks Roger) to power my Littlebox via a Din3 cable Ted made.  The Littlebox also has a four AA battery sled.  I was not going to use AA power, but am curious, if I were to plug in the batteries along with the DVD battery, would there be potential for overload / damage?  Is there also potential for redundant power?  If so, what source would take precedence?
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 > Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Littlebox Power Question
« Reply #4 on: September 17, 2012, 07:23:38 PM »
I just run mine of DVD batteries!!  One DVD battery should get you at least 20 hours so unless you are at a festival I don't see a need to run internals. 

Hi, I tried to PM Jon directly, but, apparently cannot, so I'll pose the question to the community instead.  I just picked up a 5400 mah DVD battery from a local taper (thanks Roger) to power my Littlebox via a Din3 cable Ted made.  The Littlebox also has a four AA battery sled.  I was not going to use AA power, but am curious, if I were to plug in the batteries along with the DVD battery, would there be potential for overload / damage?  Is there also potential for redundant power?  If so, what source would take precedence?

I do the exact opposite and run Internals 100% of the time :) I run 2300mah Energizer AA's and they last a LONG TIME. I change them out after around 8 hours at festies :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Brian G

  • Trade Count: (11)
  • Taperssection All-Star
  • ****
  • Posts: 1670
  • Gender: Male
  • Yeah I'm an AKG slut....
Re: Littlebox Power Question
« Reply #5 on: September 19, 2012, 09:23:58 AM »
I have the biggerbox, with internal Lithium Batteries, and an external DVD battery for festivals...The thing will run for so long. This year I ran it at Mountain Jam. Recorded 14 hours of music each day, and the DVD battery only went down by one light...The internals were not touched at all.
Mics: AKG c480b's, c460b's, c452eb's ( A60's, A51's ,A61's CK61, CK63, CK1, CK3 CK22, CK8), AKG C414 XLII/ST, AKG CK1x, CK3x M46,  Church Audio CA-11 ( Card and Omni)
Cables: Segue Dogstar Cables, Darktrain Silver Cables, Canare Starquad Cables
Pres: Lunatec V3, Naiant BiggerBox, Edirol UA-5, CA-9100 
Recorders: Sound Devices Mixpre 10II, Mixpre-6, Sony M10, Sony D50 ,Sony PCM-A10, Tascam DR-100mkii,Tascam DR-40, Edirol R-44
Playback: Fiio X5 v2, Fiio A3 v2, AKG 240MKII, AKG Y50BT

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Littlebox Power Question
« Reply #6 on: September 19, 2012, 12:18:36 PM »
I have the biggerbox, with internal Lithium Batteries, and an external DVD battery for festivals...The thing will run for so long. This year I ran it at Mountain Jam. Recorded 14 hours of music each day, and the DVD battery only went down by one light...The internals were not touched at all.

Damn that's a pretty good battery life. My 1st LB back in early 2011 had a DIN3 external power jack but I NEVER used it. So my newest KCY/XLR LB does NOT have a DIN3 external power jack. So I can ONLY power it via AA batteries. Which is fine by me! Since I have a SHITLOAD of rechargeable Energizer 2300mah NIMH AAs :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Littlebox Power Question
« Reply #7 on: September 19, 2012, 03:19:58 PM »
i have the din3 on my lb and use a rc battery
i can't even tell you how long it gets because i have never gone long enough
but its easily 6 hrs and i am guessing much more
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline chinariderstl

  • Trade Count: (43)
  • Taperssection All-Star
  • ****
  • Posts: 1260
  • Gender: Male
    • https://chris-finn.com/
Re: Littlebox Power Question
« Reply #8 on: September 19, 2012, 05:18:20 PM »
Yeah, I just rocked out the DVD battery and there were no power concerns whatsoever.  Thanks everyone for the input.
Mics: Audio-Technica AT853's, Avantone CK-40 (Busman mod), Busman BSC1's, DPA 4022's, DPA 4060's
Pres: Apogee Mini-MP, Core Sound Battery Box
Decks: Sony PCM-M10, Tascam DR-2D, Tascam DR-680 (Busman mod)
Power: Initial RB-270, Naztech PB15000
LMA: http://www.archive.org/search.php?query=taper%3A%22Chris+Finn%22

Offline Brian G

  • Trade Count: (11)
  • Taperssection All-Star
  • ****
  • Posts: 1670
  • Gender: Male
  • Yeah I'm an AKG slut....
Re: Littlebox Power Question
« Reply #9 on: September 20, 2012, 08:55:14 AM »
I have the biggerbox, with internal Lithium Batteries, and an external DVD battery for festivals...The thing will run for so long. This year I ran it at Mountain Jam. Recorded 14 hours of music each day, and the DVD battery only went down by one light...The internals were not touched at all.

Let me clarify. It only went down one light each day not both days combined...But still its incredible.
Mics: AKG c480b's, c460b's, c452eb's ( A60's, A51's ,A61's CK61, CK63, CK1, CK3 CK22, CK8), AKG C414 XLII/ST, AKG CK1x, CK3x M46,  Church Audio CA-11 ( Card and Omni)
Cables: Segue Dogstar Cables, Darktrain Silver Cables, Canare Starquad Cables
Pres: Lunatec V3, Naiant BiggerBox, Edirol UA-5, CA-9100 
Recorders: Sound Devices Mixpre 10II, Mixpre-6, Sony M10, Sony D50 ,Sony PCM-A10, Tascam DR-100mkii,Tascam DR-40, Edirol R-44
Playback: Fiio X5 v2, Fiio A3 v2, AKG 240MKII, AKG Y50BT

Offline carpa

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 211
Re: Littlebox Power Question
« Reply #10 on: December 17, 2012, 05:48:34 AM »
I also own a littlebox with a din power input, though I've been using it with 4 1.5v  AA till now.

In order to add an external battery from the din input, I wonder what the correct voltage must be for the littlebox.  I think is something  "from  X  to Y " but I don't remember.
I also don't know what type of batteries and charger exist ( I know nothing about "DVD batteries" I've read of here).
thanks a lot for your answers
c

Offline chinariderstl

  • Trade Count: (43)
  • Taperssection All-Star
  • ****
  • Posts: 1260
  • Gender: Male
    • https://chris-finn.com/
Re: Littlebox Power Question
« Reply #11 on: December 17, 2012, 08:20:27 AM »
This is the one I have, I got is used from a local taper.  They sometimes, though rarely, show up in the Yard Sale.

http://www.bhphotovideo.com/c/product/375503-REG/Initial_RB270_RB_270_Universal_Rechargeable_Battery.html

You might want to post an ISO in the Yard Sale, or there are a bunch of batteries out on the market these days.

A lot of people picked this one up, though this might be overkill for the Littlebox.

http://www.ebay.com/itm/18000mAh-Universal-External-Battery-HTC-Google-Nexus-One-HD7-Evo-4G-ipad2-3-/310527361419?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D4219952876764044347%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D310527361419%26
Mics: Audio-Technica AT853's, Avantone CK-40 (Busman mod), Busman BSC1's, DPA 4022's, DPA 4060's
Pres: Apogee Mini-MP, Core Sound Battery Box
Decks: Sony PCM-M10, Tascam DR-2D, Tascam DR-680 (Busman mod)
Power: Initial RB-270, Naztech PB15000
LMA: http://www.archive.org/search.php?query=taper%3A%22Chris+Finn%22

 

RSS | Mobile
Page created in 0.074 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF