Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Best Li-Ion route for a V3 and a 2k.  (Read 2611 times)

0 Members and 1 Guest are viewing this topic.

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Best Li-Ion route for a V3 and a 2k.
« on: January 16, 2007, 10:25:30 PM »
So with the uprgade to the 2k, I must replace my lead with Li-Ion.  What's my best bet?  My V3 is currently set to 6v.  Two DVD batts? One for each? I see a 5400mAH can be had for 40 beans..

Jesse
Logged
FREE JERRYFREAK!

Offline gratefulphish

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1568
  • Gender: Male
  • Gone Tapin'
Re: Best Li-Ion route for a V3 and a 2k.
« Reply #1 on: January 16, 2007, 10:42:04 PM »
What's the volatage on the 2K?  The V3 is either set to run on 6 or 12V.  It really is the same, it's just a calibration inside so that the low battey indicator works.  You may also want to check out this thread http://taperssection.com/index.php/topic,78206.0.html

I have been running a V3 on one of the 9V Wallys, and it is running fine, and according to that thread, is not an issue.  Need to know what the 2K needs to run.
Logged
4 channel: Neumann TLM-170R>Segue Dogstar>SD 722   2 channel: Neumann TLM-170R>Segue Dogstar>Lunatec V3>SD 722
               Linked to Lunatec V3>MT 24/96                                     (Hi-Ho Silver Interconnects)     

Other gear: AKG C451Es, Tascam DA-P1, Sony D-8

Offline JNT

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1123
Re: Best Li-Ion route for a V3 and a 2k.
« Reply #2 on: January 16, 2007, 11:37:15 PM »
The AD2k is 12V.  Two of the DVD batteries in series would work if they have a 6V setting otherwise you could use a voltage regulator to drop the 18V down to 12V.

Joe
Logged
Mostly retired from taping.

JW Mod AKG 460+CK61/CK1/CK2/CK63>V3>
or
AKG CK1x/CK2x/>MK46>JW MOD C460>V3>

AKG C34>

>R44

"Drinking will help us plan!"  Moe Szyslak

Offline hammerhorror

  • Trade Count: (54)
  • Taperssection All-Star
  • ****
  • Posts: 1259
  • Gender: Male
  • Hey good lookin'
Re: Best Li-Ion route for a V3 and a 2k.
« Reply #3 on: January 17, 2007, 08:23:07 AM »
Quote from: JNT on January 16, 2007, 11:37:15 PM
The AD2k is 12V.  Two of the DVD batteries in series would work if they have a 6V setting otherwise you could use a voltage regulator to drop the 18V down to 12V.

Joe
The AD2K+ will run on any voltage between 12v - 18v. So any Li-ion in that range will work.
Logged
Mics: Schoeps MK4 & MK41, AKG CK63 (Naiant Actives)
 
Preamps: Naiant KCY Littlebox

Recorders: Sound Devices 664, Sony PCM-M10

Offline gratefulphish

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1568
  • Gender: Male
  • Gone Tapin'
Re: Best Li-Ion route for a V3 and a 2k.
« Reply #4 on: January 17, 2007, 04:35:37 PM »
I would consider getting your V3 reset to 12V, instead of 6, and that way you can have just one battery system to contend with.
Logged
4 channel: Neumann TLM-170R>Segue Dogstar>SD 722   2 channel: Neumann TLM-170R>Segue Dogstar>Lunatec V3>SD 722
               Linked to Lunatec V3>MT 24/96                                     (Hi-Ho Silver Interconnects)     

Other gear: AKG C451Es, Tascam DA-P1, Sony D-8

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Re: Best Li-Ion route for a V3 and a 2k.
« Reply #5 on: January 17, 2007, 04:43:38 PM »
Ballpark ideas on total batt life with a V3 & AD2k running off a EC-90?

Thanks,
Jesse
Logged
FREE JERRYFREAK!
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.055 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF