Become a Site Supporter and Never see Ads again!
« previous next »
Pages: 1 ... 20 21 22 23 24 [25] 26 27 28   Go Down

Author Topic: EDIROL R-44 (PART IV)  (Read 115734 times)

0 Members and 1 Guest are viewing this topic.

Offline justink

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1973
  • Gender: Male
Re: EDIROL R-44 (PART IV)
« Reply #360 on: January 14, 2012, 06:39:38 PM »
Quote from: twoodruff on January 14, 2012, 06:24:03 PM
What kind of cards do I need for the r44?

i've used kingston 16gb class 4 and some off brand 32gb class 10.  never any problems running four channels 24/96.  just make sure it's class 4 or higher and i think you'll be safe.
Logged
Mics:
DPA 4023 (Cardioid)
DPA 4028 (Subcardioid)
DPA 4018V (Supercardioid)
Earthworks TC25 (Omni) 

Pres and A/D's:
Grace Design Lunatec V3 (Oade ACM)
Edirol UA-5 (bm2p+ Mod)

Recorders:
Sound Devices MixPre10 II
Edirol R-44 (Oade CM)
Sony PCM‑M10

Offline twoodruff

  • Trade Count: (91)
  • Needs to get out more...
  • *****
  • Posts: 4687
  • Gender: Male
Re: EDIROL R-44 (PART IV)
« Reply #361 on: January 14, 2012, 06:45:35 PM »
Compact flash? sd?
Logged
No Mics
Clamps
Cables
No Preamp
Recorders

Offline justink

  • Trade Count: (4)
  • Taperssection All-Star
  • ****
  • Posts: 1973
  • Gender: Male
Re: EDIROL R-44 (PART IV)
« Reply #362 on: January 14, 2012, 06:50:13 PM »
Logged
Mics:
DPA 4023 (Cardioid)
DPA 4028 (Subcardioid)
DPA 4018V (Supercardioid)
Earthworks TC25 (Omni) 

Pres and A/D's:
Grace Design Lunatec V3 (Oade ACM)
Edirol UA-5 (bm2p+ Mod)

Recorders:
Sound Devices MixPre10 II
Edirol R-44 (Oade CM)
Sony PCM‑M10

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: EDIROL R-44 (PART IV)
« Reply #363 on: January 15, 2012, 11:59:40 AM »
Checking in, got my R-44 a week or so ago. I'm curious, mine is a Roland rather than an Edirol or an Edirol by Roland. Anybody else have the completely rebranded version yet?
Logged
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Re: EDIROL R-44 (PART IV)
« Reply #364 on: January 15, 2012, 12:12:32 PM »
They stopped using the Edirol name a while ago!!  Similar to the Roland R-05 instead of using Edirol so you would have to purchase one new with in the last year or so. 

Quote from: bryonsos on January 15, 2012, 11:59:40 AM
Checking in, got my R-44 a week or so ago. I'm curious, mine is a Roland rather than an Edirol or an Edirol by Roland. Anybody else have the completely rebranded version yet?
Logged
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: EDIROL R-44 (PART IV)
« Reply #365 on: January 15, 2012, 12:20:44 PM »
Quote from: jmbell on January 15, 2012, 12:12:32 PM
They stopped using the Edirol name a while ago!!  Similar to the Roland R-05 instead of using Edirol so you would have to purchase one new with in the last year or so. 

Quote from: bryonsos on January 15, 2012, 11:59:40 AM
Checking in, got my R-44 a week or so ago. I'm curious, mine is a Roland rather than an Edirol or an Edirol by Roland. Anybody else have the completely rebranded version yet?

Yeah, but I've seen a couple "new" ones in the field that were labeled "Edirol by Roland." Must've been old stock.
Logged
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline jbell

  • TDS
  • Trade Count: (149)
  • Needs to get out more...
  • *****
  • Posts: 4568
  • Gender: Male
  • Spreadicated
Re: EDIROL R-44 (PART IV)
« Reply #366 on: January 15, 2012, 12:28:43 PM »
I can't honostly say that I've paid attention to the labeling on the R44!!  I only know one taper locally that runs the R44.  Are you gonna have yours modded or keep it stock??
Logged
Mics: DPA ST4011ER & 4018ER | Neumann kk 184 (matched)> Nbob/PFA
Preamps: DPA MMA 6000 | Audioroot Femto
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-20        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: EDIROL R-44 (PART IV)
« Reply #367 on: January 15, 2012, 12:32:55 PM »
Another R-44 newb question. I bought a Sandisk class 4, 32Gb card to run in it. Got a great price, so I didn't look too close, but when it arrived it was actually MicroSD. I figured, I goofed but I also have an M10 I can use it in, so I might as well try it out with the adapter. Formatted it, and after 2 shows no issues yet. Did I luck out, or are folks doing this regularly?
Logged
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline bryonsos

  • Omni addict
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 2061
  • Gender: Male
  • If it's important, tell me to write it down.
    • LMA uploads
Re: EDIROL R-44 (PART IV)
« Reply #368 on: January 15, 2012, 12:35:55 PM »
Quote from: jmbell on January 15, 2012, 12:28:43 PM
I can't honostly say that I've paid attention to the labeling on the R44!!  I only know one taper locally that runs the R44.  Are you gonna have yours modded or keep it stock??

Stock for now. I've run it twice as an all in one, now I'm going to see if either of my pres makes a difference in front of it. From what I've heard, the internal pres sound fine. No color that I can hear.
Logged
Mics: 3 Zigma Chi HA-FX (COL-251, c, h, o-d, o-f) / Avenson STO-2 / Countryman B3s
Pres: CA-Ugly / Naiant Tinyhead / SD MixPre
Decks: Roland R-44 / Sony PCM-M10
GAKables
Dead Muppets

My recordings LMA / BT / TTD

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: EDIROL R-44 (PART IV)
« Reply #369 on: January 16, 2012, 12:52:35 AM »
Quote from: bryonsos on January 15, 2012, 12:32:55 PM
Another R-44 newb question. I bought a Sandisk class 4, 32Gb card to run in it. Got a great price, so I didn't look too close, but when it arrived it was actually MicroSD. I figured, I goofed but I also have an M10 I can use it in, so I might as well try it out with the adapter. Formatted it, and after 2 shows no issues yet. Did I luck out, or are folks doing this regularly?

I regularly use a microsdhc card w/ an SDHC Adapter w/ zero issues :)
Logged
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline bugg100

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1015
  • Gender: Male
Re: EDIROL R-44 (PART IV)
« Reply #370 on: January 16, 2012, 12:01:08 PM »
always 24/44.1 mono here, with CLASS 2, never failed, lots of recording time...
Logged

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7657
Re: EDIROL R-44 (PART IV)
« Reply #371 on: February 18, 2012, 09:25:56 PM »
i would be able to run spdif in (from the ad2k+) for two channels and xlr in for the other two channels (sbd) and use the ad2k+ to clock all four channels, right...

from what i read, this unit has no problem being powered reliably in the field...
Logged
-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3177
  • Gender: Male
  • Jarts don't kill people!
Re: EDIROL R-44 (PART IV)
« Reply #372 on: February 18, 2012, 09:37:20 PM »
Quote from: macdaddy on February 18, 2012, 09:25:56 PM
i would be able to run spdif in (from the ad2k+) for two channels and xlr in for the other two channels (sbd) and use the ad2k+ to clock all four channels, right...

from what i read, this unit has no problem being powered reliably in the field...

Someone can step in and call me an idiot if I am wrong.

You can do Dig + Ana and run SPDIF on 1 & 2 and an analog set via the combo jacks (1/4" / XLR) on 3 & 4.  As for the clock the R-44 will sync both up for you so there is no need.

I run Stereo x 2 at 24/48 all day long and just drop the files in and editor and render away.  (Maybe a slight delay added if my mics are not on stage.)

Do not quote me on this but I think that the R-44 may resample on the analog channels.  I never bothered to look around to see so hopefully someone will speak up and clarify it for me too.  B/C if it doesn't then I will pick up a pre to put in between the console and my R-44 too.

Logged
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://www.concertarchives.org/kskreider
https://archive.org/details/thespps

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7657
Re: EDIROL R-44 (PART IV)
« Reply #373 on: February 19, 2012, 09:53:03 AM »
ugh. i dont want anything resampled or reclocked. i want the ad2k to feed a digi in for two channels, and i want the other two channels (from say a sbd feed) to sync also to that external clock.
Logged
-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

Offline mepaca

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 269
  • taperssection member
Re: EDIROL R-44 (PART IV)
« Reply #374 on: February 19, 2012, 12:34:37 PM »
the r-44 does not resample
Logged
Pages: 1 ... 20 21 22 23 24 [25] 26 27 28   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.076 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF