Taperssection.com

Gear / Technical Help => Cables => Topic started by: nicegrin on September 22, 2010, 06:33:25 PM

Title: 4 pin mini female XLR to 5 pin mini XLR cables!
Post by: nicegrin on September 22, 2010, 06:33:25 PM

Hi all!

I´m looking for a set of good quality cables with the following  specifications:

4 pin female mini XLR (*) to 5 pin female mini XLR (**) and about 3-4 feet (90-120 cm) long.
Basically a set of shorter cables that I can run between the Beyerdynamics CK930 caps and the CV 900 bodies instead of the 10 ft standard cables that come with the set.

Could anyone here point me to where I can buy such cables or if they have to be custom made, if so is there any cable wizard here at TS that could make a pair and sell me!  ;D

Thanks!
Nicegrin


 Specs:

*,

On mic body:

Pin1 = 0 v.
Pin2 = +48 v.
Pin3 = AF input
Pin 4 = +8.2 v.
Pin 5 = n.c.

**,

On mic capsule:

Pin1= o v.
Pin2= +48v input
Pin3 = NF output 
Pin4 = +8.2 V input

Title: Re: 4 pin mini female XLR to 5 pin mini XLR cables!
Post by: Chuck on September 23, 2010, 01:44:04 PM

Contact Ted:
http://taperssection.com/index.php?topic=138965.0

Title: Re: 4 pin mini female XLR to 5 pin mini XLR cables!
Post by: page on September 23, 2010, 02:29:36 PM

Agree. Rob did mine, but Ted's willing as far as I know, just send him the pin out info.

Why beyer did a pin mismatch when its not used is beyond me...

Title: Re: 4 pin mini female XLR to 5 pin mini XLR cables!
Post by: JasonSobel on September 23, 2010, 06:17:22 PM

I have had two sets of these cables made for my CK930's (in addition to the 10 ft set that comes with them).  Robb made me one set (5ft), and HAVE made the other (20ft).  Both did great work.  The Belden 1804a cable works very well for this.  My 20 ft set (from HAVE) is with the Belden 1804a and it's great.