Become a Site Supporter and Never see Ads again!

Author Topic: Splitting an SLA 12v  (Read 6009 times)

0 Members and 1 Guest are viewing this topic.

DaryanLenz

  • Guest
  • Trade Count: (0)
Splitting an SLA 12v
« on: January 19, 2003, 11:27:04 PM »
OK, I got me a question :D  Is it possible to power two 12 volt devices (sonosax, and ad1k)- off of the same 12 volt SLA battery!  I have a 12/12 brick, that I was thinking might be put to better use powering something else along with the apogee.  If this is possible, how the heck can I do it.  What would I solder where is what I would need to know!  Thanks

Daryan

Anyone know when phish mail order tiks arrive?  I need to get those kids in cheeseville there chi tapers ;D

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:Splitting an SLA 12v
« Reply #1 on: January 20, 2003, 10:27:11 AM »
Hey Daryan - you just need to connect the two power cables in parallel.  Oh!  And make sure your fuse is rated for a high enough current so it doesn't blow (you did fuse your 12v SLA, didn't you?) :)

Lemme know if you need more detail...
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

DaryanLenz

  • Guest
  • Trade Count: (0)
Re:Splitting an SLA 12v
« Reply #2 on: January 20, 2003, 01:17:01 PM »
Yeah, what does "connect the two in parrallel" mean exactly?  I just need to know what to solder, and where!  Nope, never have used a fuse, and probably won't until I fugure out how to solder a little more efficiently...and Jonny told me he never used em, so I didn't either (which is pertinent, since all the struff in between the deck and the mics used to be jonny's)!  Any, and further help, is much appreciated!

daryan

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:Splitting an SLA 12v
« Reply #3 on: January 20, 2003, 01:45:25 PM »
Alright, my ASCII doesn't seem to be showing up correctly, so...here's a link:

http://www.geocities.com/bskalinder/parallel.html

Unfortunately, it doesn't provide all the answers.  But it's all I know having never used an AD1K or Sax power plug.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline hippies

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 830
  • Gender: Male
  • "What we all need is a left hand monkey wrench."
Re:Splitting an SLA 12v
« Reply #4 on: January 20, 2003, 01:55:51 PM »
http://www.howstuffworks.com/battery4.htm

thirdofthree is just saying to wire both hot leads to the 'pos' terminal, and both ground leads to the 'neg' terminal.  he also makes a very good point about fusing your leads.  place an inline fuse on the 'pos' lead of each.  (horseshoe car type works fine and are easy to find if you ever need one).

make sure the amp rating is low enuf to protect your gear, yet high enough so it won't blow under normal use.  you should only load a circuit with 3/4 it's rated load.  so if you are running a 7.5ah battery, then a 10amp fuse would be called for.  for 12ah, a 15amp fuse should be fine.

BTW:  i thought the Sax ran on 9V?
« Last Edit: January 20, 2003, 01:58:12 PM by hippies »

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re:Splitting an SLA 12v
« Reply #5 on: January 20, 2003, 05:20:43 PM »
Uhmmmm, yeah, hippies, I think that's what I said.   :)

Actually, glad to have it reiterated, though - some folks do well with pictures, others with words.  Always good to provide both.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

DaryanLenz

  • Guest
  • Trade Count: (0)
Re:Splitting an SLA 12v
« Reply #6 on: January 20, 2003, 05:45:13 PM »
Thanks a ton for the info, I will try this this evening, and let you know how it works out.  The sax runs on 2 9v internal, 12-24 external dc.  

Daryan

 

RSS | Mobile
Page created in 0.096 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF