Become a Site Supporter and Never see Ads again!

Author Topic: Right Angle Hirose 4pin power cable - is the angle adjustable?  (Read 5393 times)

0 Members and 1 Guest are viewing this topic.

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
Had issues with a Hirose...had Vark make a modification from Board mount to Chassis mount and now my RA cables exit at an angle that is not optimal...

Adjustable or am I back to straight Hirose?

« Last Edit: April 03, 2018, 09:36:26 AM by Hypnocracy »
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline Neilyboy

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 917
  • Gender: Male
Re: Right Angle Hirose 4pin power cable - is the angle adjustable?
« Reply #1 on: April 03, 2018, 09:48:07 AM »
I have yet to build mine but I would have to assume based on the pictures of it disassembled that it can be rotated. You would just have to re-shrink it.

Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: Right Angle Hirose 4pin power cable - is the angle adjustable?
« Reply #2 on: April 03, 2018, 10:26:07 AM »
Thanks! I had gone the easy route and bought these...
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Right Angle Hirose 4pin power cable - is the angle adjustable?
« Reply #3 on: April 03, 2018, 11:01:48 AM »
It has four positions, 3:00, 6:00, 9:00 and 12:00.  You need to take out the 2 small screws and adjust the housing.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

 

RSS | Mobile
Page created in 0.049 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF