Become a Site Supporter and Never see Ads again!

Author Topic: SONY PCM-M10 (Line In or Microphone)  (Read 2091 times)

0 Members and 1 Guest are viewing this topic.

Offline aaronji

  • Site Supporter
  • Trade Count: (6)
  • Needs to get out more...
  • *
  • Posts: 2425
Re: SONY PCM-M10 (Line In or Microphone)
« Reply #15 on: January 09, 2018, 09:45:26 AM »
DSatz and guysonic did some measurements about this years ago.  Basically, the mic input can handle ~ 2dBu and the line input can take ~ 24 dBu.  If you are below 0 dBFS with the gain at 1 (line) or ~ 1.5 - 2 (mic), you won't brickwall.  See these posts:

http://taperssection.com/index.php?topic=130924.msg1722931#msg1722931
http://taperssection.com/index.php?topic=130924.msg1722942#msg1722942
http://taperssection.com/index.php?topic=154969.msg2014600#msg2014600

Offline nulldogmas

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 830
Re: SONY PCM-M10 (Line In or Microphone)
« Reply #16 on: January 09, 2018, 12:19:51 PM »
DSatz and guysonic did some measurements about this years ago.  Basically, the mic input can handle ~ 2dBu and the line input can take ~ 24 dBu.  If you are below 0 dBFS with the gain at 1 (line) or ~ 1.5 - 2 (mic), you won't brickwall.  See these posts:

http://taperssection.com/index.php?topic=130924.msg1722931#msg1722931
http://taperssection.com/index.php?topic=130924.msg1722942#msg1722942
http://taperssection.com/index.php?topic=154969.msg2014600#msg2014600

Thanks, bookmarking these!

 

RSS | Mobile
Page created in 0.105 seconds with 24 queries.
© 2002-2018 Taperssection.com
Powered by SMF