Become a Site Supporter and Never see Ads again!

Author Topic: Favorite New Microphone Stand  (Read 1816 times)

0 Members and 1 Guest are viewing this topic.

Offline down2earthlandscaper

  • Multiple-Rig Maniac
  • Site Supporter
  • Trade Count: (25)
  • Taperssection Member
  • *
  • Posts: 634
  • Gender: Male
Re: Favorite New Microphone Stand
« Reply #15 on: March 04, 2018, 03:23:03 PM »
There's even a smaller one, more expensive, but collapses down to a measly 16".   Max height is 6' 3" inches.  Just add a Matthews 48" Extension pole.

It's the exact same stand as the Photek, just smaller.

Promaster LS-CT Compact Travel stand

https://www.amazon.com/Promaster-LS-CT-Compact-Travel-Light/dp/B00EO4WRNG

What is the footprint of this Promaster when the legs are fully extended?
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 2641
  • Gender: Male
  • http://db.etree.org/cheesecadet
Re: Favorite New Microphone Stand
« Reply #16 on: March 04, 2018, 04:13:20 PM »
There's even a smaller one, more expensive, but collapses down to a measly 16".   Max height is 6' 3" inches.  Just add a Matthews 48" Extension pole.

It's the exact same stand as the Photek, just smaller.

Promaster LS-CT Compact Travel stand

https://www.amazon.com/Promaster-LS-CT-Compact-Travel-Light/dp/B00EO4WRNG

14" without the second extension of the legs out.  21" when both sections of legs are fully extended.  This thing is really awesome.  You can also lay the legs flat to run on stage eliminating the need for a separate stand.
What is the footprint of this Promaster when the legs are fully extended?
AKG481's | DPA4061's | AT933's (w/ AT-ADAPT + AT853SC-ELE/AT853C-ELE/AT853O-ELE) | ECM19B's | Shure FP24 | Tinybox v1.5 | PIPsqueak | PCM-M10 x 2 | Tascam DR70D | Promaster LS-CT | Matthews Baby Extension | Adobe Audition CS6 | Izotope |

05/02 MH, 05/03 PoW (?), 06/03 TLG, 06/20 FirstGrass, 06/21 TBF, 07/17 SCI, 07/18 SCI, 08/09 MH, 08/10 MH, 8/11 MH, 08/18 Chuck Prophet, 08/25 Nedfest, 08/31 Phish

Offline Neilyboy

  • Trade Count: (12)
  • Taperssection Member
  • ***
  • Posts: 900
  • Gender: Male
Re: Favorite New Microphone Stand
« Reply #17 on: March 07, 2018, 07:52:33 AM »
There's even a smaller one, more expensive, but collapses down to a measly 16".   Max height is 6' 3" inches.  Just add a Matthews 48" Extension pole.

It's the exact same stand as the Photek, just smaller.

Promaster LS-CT Compact Travel stand

https://www.amazon.com/Promaster-LS-CT-Compact-Travel-Light/dp/B00EO4WRNG

So after a month long backorder fro B&H for the Photek stand with no arrival date in forseeable future, I cancelled that order.  Next day I ordered the smaller promaster stand and matthews baby extension that Spyder recommended.

My life is changed when it comes to mic stands.  Seriously.  This combo is amazing, compact, and super sturdy.  Still has a small footprint when fully extended.  Can fit both pieces into a backpack and combned they weigh a little under 4lbs. 

Thanks for the recommendation, so stoked.

They must have just gotten them back in stock. I was able to order one last night.
Neil
Mic's: AKG C214's, Line Audio CM3, AT4041SP, AT853 (C, SC, O), AT943 (C, H)
Pre's: Sound Devices MixPre 2
Rec's: Sony PCM-M10, Edirol R-44, Tascam DR60D MKii, Tascam DR70D x 2

Offline Cheesecadet

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 2641
  • Gender: Male
  • http://db.etree.org/cheesecadet
Re: Favorite New Microphone Stand
« Reply #18 on: March 07, 2018, 11:00:51 AM »
I’m actually glad I went with the smaller one with extension. Much more versatile imo
AKG481's | DPA4061's | AT933's (w/ AT-ADAPT + AT853SC-ELE/AT853C-ELE/AT853O-ELE) | ECM19B's | Shure FP24 | Tinybox v1.5 | PIPsqueak | PCM-M10 x 2 | Tascam DR70D | Promaster LS-CT | Matthews Baby Extension | Adobe Audition CS6 | Izotope |

05/02 MH, 05/03 PoW (?), 06/03 TLG, 06/20 FirstGrass, 06/21 TBF, 07/17 SCI, 07/18 SCI, 08/09 MH, 08/10 MH, 8/11 MH, 08/18 Chuck Prophet, 08/25 Nedfest, 08/31 Phish

Offline audBall

  • Trade Count: (34)
  • Needs to get out more...
  • Posts: 5757
  • Gender: Male
Re: Favorite New Microphone Stand
« Reply #19 on: March 07, 2018, 11:57:57 AM »
Thank you to everyone in this thread for your suggestions.

It was high time for a stand replacement.

Offline mccordo

  • Trade Count: (13)
  • Taperssection Member
  • ***
  • Posts: 396
  • Gender: Male
  • Area Man
Re: Favorite New Microphone Stand
« Reply #20 on: March 07, 2018, 12:45:49 PM »
I used the stand Pat suggested for the first time at Dead & Co last week and couldn’t be happier. Set up on the arena floor at the back of the SBD, but they had ice down for the minor league hockey team, so bouncy plywood was our floor instead of solid concrete. Easy to carry, easy to set up and gaff tape to the floor. Not sure if it was because of the rubber feet of the stand or the shockmount, but I had zero disturbances on the recording despite having a girl “dance” around the area behind the stand by stomping back and forth in cowboy boots for a good portion of the 1st set.
Mics: AKG ck63 Hypercards nBob Actives (460B bodies unused), Rode NT6/MJE-384K Roadster (Michael Joly modded Cards), Audix M1280 Hypercards, Audix M1290 Cards, AT853 Cards, Church Audio CA-11 Cards, AT MT830R Omnis
Pres: Grace Design Lunatec V2, Edirol UA-5, Church Audio CA-9200, Naiant PIPsqueak
Recorders: SoundDevices MixPre-6, SoundDevices MixPre-3, Tascam DR-100mkII, Sony PCM-M10

Offline nolamule

  • Trade Count: (22)
  • Taperssection Member
  • ***
  • Posts: 601
  • where's my mule?
Re: Favorite New Microphone Stand
« Reply #21 on: March 08, 2018, 03:17:08 PM »
How stable is it with the extension? I have used a Manfrotto 1051 BAC that I have used for awhile now but it is a little top heavy and wobbly with the extension fully extended.

I’m actually glad I went with the smaller one with extension. Much more versatile imo

Offline checht

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 86
  • Gender: Male
  • Mule Team
Re: Favorite New Microphone Stand
« Reply #22 on: March 22, 2018, 02:50:37 PM »
Ordered on Tuesday, got shipping notification today (Thursday)!

Thanks Pat
Old and in the Way

Mics: Schoeps MSTC64g, Shure MV-88
Decks: Sound Devices MP-3, Fostex FR-2 (Oade warm mod), iPad 5g

 

RSS | Mobile
Page created in 0.16 seconds with 30 queries.
© 2002-2018 Taperssection.com
Powered by SMF