Become a Site Supporter and Never see Ads again!

Author Topic: Set Up Problem  (Read 1017 times)

0 Members and 1 Guest are viewing this topic.

Offline Breaking The Law

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 8
Re: Set Up Problem
« Reply #15 on: March 06, 2018, 12:24:52 PM »
Thanks for all the tips. Going to order some of that cleaner and try some of the other ideas, and worst case purchase some new mics and go from there.
Thanks again!

Offline KISSFAN

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 126
Re: Set Up Problem
« Reply #16 on: March 06, 2018, 04:50:03 PM »
Thanks for all the tips. Going to order some of that cleaner and try some of the other ideas, and worst case purchase some new mics and go from there.
Thanks again!
I recently had an issue like this (one channel dropout for chunks of time that didn't happen all the time) that turned out to be the right angle connector on the mics. had to send them in for repair.

 

RSS | Mobile
Page created in 0.052 seconds with 24 queries.
© 2002-2018 Taperssection.com
Powered by SMF