Become a Site Supporter and Never see Ads again!

Author Topic: Where do you plug in on a soundboard?  (Read 15228 times)

0 Members and 1 Guest are viewing this topic.

Offline hoppedup

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 3349
  • Sa da tay!
Re: Where do you plug in on a soundboard?
« Reply #30 on: September 16, 2013, 12:38:45 PM »
I need some cables from Darktrain so that I can patch out of ANY SBD>M10.

I have these items and have not encountered a board I couldn't patch into:

http://www.bhphotovideo.com/c/product/408119-REG/Hosa_Technology_GPR_101_GPR101_Male_Phone_to.html

x2: http://www.bhphotovideo.com/c/product/408137-REG/Hosa_Technology_GXF_132_GXF132_RCA_to_XLR.html

x2: http://www.bhphotovideo.com/c/product/408138-REG/Hosa_Technology_GXM_133_GXM133_RCA_to_3_Pin.html

http://www.bhphotovideo.com/c/product/909159-REG/comprehensive_mps_2pp_6st_3_5mm_stereo_mini_plug.html

This is compact for me and allows me to carry one 1/8" to RCA male cable to make it all work. Around $20 before shipping.

The XLR male adapter is the least used, but I'm glad I had it recently at Hopscotch Festival. The first night's venue gave me a pigtail with XLR female to connect to.

Another tip: Check your levels during soundcheck if possible and again when the band is playing. If you set levels with the house music playing, you are unlikely to get a good read on what the show levels will be like. Also, you may not get anything when the house music is on, depending on how the engineer has your output configured.

And I always ask before I plug in even if I've taped somewhere 50 times before.
AKG SE300B CK91
JB Mod NAK 300 CP1 - CP2

Tascam DR-40, Tascam DR-60D, Tascam DR-22WL, Marantz PMD-706
Panasonic Lumix DMC-G7K

↑↑↓↓←→←→ BA Start
         


My recordings on bt.etree
  
My recordings on LMA

 

RSS | Mobile
Page created in 0.276 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF