seriously, i wouldnt lead you wrong... leegeddy
u wont be let down
does he leave the extra pin, from the bal to unbal, on the ad20 capped off?...where are you marc ;-)
i was out of town on b'ness up in chicago all last week.
2 xlr > female mini is pretty straight forward.
XLR: MINI:
Pin 2 from Right XLR Ring
Pin 2 from Left XLR Tip
Pins 3 from both L & R Sleeve (gnd.)
Pins 1 from both L & R Sleeve (gnd.)
you don't have to worry about chassis ground on the xlr. it will automatically ground since you're grounding Pins 1 from L&R to the Mini Sleeve.
the tricky part of the female mini is determining which post is sleeve and which post is ring. the solder post in the center is tip, and the solder post to the side is ring.
if you get Tip and Ring backwards, your channel will be swapped since the industry standard is: Ring = Right = Red (the "3 R's")
bon chance!!
marc