Topic: Microtrack II Love?

[jb63]

Digging around h=in here to find a Microtrack board and I can't find it!

Did everyone hate it so much that there isn't even a board left?

(heh)

I picked up one that was "supposed" to be working, but it came with no CF card. Did the research and bought a CF card, plugged it in, updated the firmware, adjusted the settings, then had to unplug it from the computer to use the computer for emergency other crap. Now, just because I am an idiot, I told the micro track to shut down, didn't eject any cards from the desktop or whatnot, just told it to shut down. Which it promptly tried to do for 45 minutes. It then became an emergency that the computer had to go, so I had to unplug everything and run to work.

an hour later it was still trying to shut down, so after lots of searching found this:

http://forums.m-audio.com/showthread.php?10115-Frozen-Microtrack-24-96

and was able to shut it off using the power and menu switches.

Now it is a brick. About $80 worth of brick, although I suppose the $16 card can still be returned.

I was simply trying to get something small and cheap to feed from my SBM1, but as usual, I just love throwing money out the door.

Is there any way to torn one of these back on once this happens? All can find is hate for this beast.
There has to be a dead board here somewhere I can waste more time searching...

[jb63]

OK, so the next day, I plug it in and the logo appears and it begins charging.

We'll see….

I remember what a pain it was to have the pocket-sized combination of the SBM-1>M1 with the very tricky 7-pin connector and how hard it was to work out how to avoid stress to that contact point.
I was hoping to somehow avoid that with what looked like a more solid connection of the SPDIF plug on the microtrack, but this thing is a real quirky little box if its going to behave like this.

There really needs to be a nice solid state recorder like this microtrack that actually works.

[anhisr]

I use my MT II as a bit bucket behind a V3.   I have had a problem only once using it in that setup.

[Gene Poole]

I've got an MT-2496 and a MT-II and never had an issue with either (except that the MT-II needed some cleaning of the 1/4 jacks).  I use a CF to microSD adapter in mine.  Just like this one:

http://www.ebay.com/itm/161157563762

I'm still running FW ver 1.0.4 and am a little scared to update to current (1.0.7 I think) because of issues like this.

[stevetoney]

I'd pay for REAL shit before I bought another one of these POS.  So, no.  No MTII love at all from me.  I'd have gotten more out of burning four $20 bills because at least then I could add that to a short list of crazy things I've done in my life.

[Jhurlbs81]

I loved mine when I had it.  I never had issues.  Great bit bucket IMO.

[jb63]

See what I mean?
Its almost like every other one was bad.

[dnsacks]

why not ditch both the sbm-1 and the micro track and go with a sony m10? -- its a>d sounds quite nice (to my ears), supports a very wide range of input levels through its line in, is very user-friendly (to me), has good metering (digital meters on the screen plus "confidence" and "over" leds for each channel)  and is being extensively used behind some really nice sounding preamps/rigs (the schoeps>actives>tinybox>m10 is becoming a gold standard for low profile rigs).  Plus it will run forever on a pair of aa batteries.

[SClassical]

the only problem I experienced was that only one channel was recorded when I wanted it to record in stereo... and another time i get a message "no signal"... and sometimes I get 1 drop out for a few sec after recording for over 1 hr straight. all times were using with the V3 and the MTII as the bitbucket. So I only had 3 problems. I know how to solve the "no signal" issue but have no idea why I get a few sec dropout after a continuous recording for over an 1hr or why sometimes it records only in 1 channel.

[jb63]

I have an m10 that I use constantly, but I am just fooling around to see what I can use as a bit bucket with the v3 or the sbm1 or the mini me. The pmd661 is HUGE by comparison, and a waste no using it's own preamps.

I'm slightly nostalgic for the dpa4061>Linestagemod sbm1>M1 tapes I pulled in small clubs and wanted to see if I could replicate that.

Anyway.

The microtrack claimed to be fully charged so I ran it through its paces. Formatted the card again. Tested the card, which reported "ok for 2496" or something.

So then I decided to shut it down, pushed the power button and here's what it's been doing for hours.
I guess that means there is some big, but I don't know if I can even figure out how to reload firmware.

Anyone have any if that?

[willndmb]

I have an m10 that I use constantly, but I am just fooling around to see what I can use as a bit bucket with the v3 or the sbm1 or the mini me. The pmd661 is HUGE by comparison, and a waste no using it's own preamps.

I'm slightly nostalgic for the dpa4061>Linestagemod sbm1>M1 tapes I pulled in small clubs and wanted to see if I could replicate that.

Anyway.

The microtrack claimed to be fully charged so I ran it through its paces. Formatted the card again. Tested the card, which reported "ok for 2496" or something.

So then I decided to shut it down, pushed the power button and here's what it's been doing for hours.
I guess that means there is some big, but I don't know if I can even figure out how to reload firmware.

Anyone have any if that?

i recall some having this issue wayyyyyy back but I don't know the outcome. Mine, mt1, always worked perfect but I know others had huge issues. Like you said above, seems hit or miss

[Gene Poole]

I have an m10 that I use constantly, but I am just fooling around to see what I can use as a bit bucket with the v3 or the sbm1 or the mini me. The pmd661 is HUGE by comparison, and a waste no using it's own preamps.

I'm slightly nostalgic for the dpa4061>Linestagemod sbm1>M1 tapes I pulled in small clubs and wanted to see if I could replicate that.

Anyway.

The microtrack claimed to be fully charged so I ran it through its paces. Formatted the card again. Tested the card, which reported "ok for 2496" or something.

So then I decided to shut it down, pushed the power button and here's what it's been doing for hours.
I guess that means there is some big, but I don't know if I can even figure out how to reload firmware.

Anyone have any if that?

I think I'd be suspect of the memory card first.  Do you have a spare to try?  I can send you mine if you want.  I have 3 CFs that I'll never use again since moving to the SD Adapter (128MiB, 2GiB, and 4GiB).

[jb63]

Hm.
Memory card. Ok. I had to buy the one I have from amazon because nothing else I have uses them.
Shoot me a message and I'll see if yours will do it.

[mepaca]

I bought one of the very first microtracks when they came out. It took 9 firmware updates before it functioned as advertised.
Besides that the unit is hobbled by it's internal battery. The unit is a cool concept but ultimately flawed.

[jb63]

Is there a way to go BACKWARDS in firmware?
I also just noticed that the backlight doesn't work.

Oh well.

Maybe those cards will get it started!