Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Audix m1280 / 1290 Wind Screen  (Read 2715 times)

0 Members and 1 Guest are viewing this topic.

Offline mterry

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 3075
  • Gender: Male
    • recordings
Audix m1280 / 1290 Wind Screen
« on: June 03, 2009, 10:12:04 AM »
In case anyone has been looking for a GOOD windscreen to fit these puppies, look no further. Its the Audix WS1281, only available from Audix. I looked all over google for any dealers, but going straight to Audix is the best bet.

Logged
"That's deplorable, unfathomable, improbable!"

"Then we played Davidson, and they wore us out. Davidson controlled us - other than Kentucky - as well as any team all year long"
- Bill Self on PTI (2/28/11)

DPA 2012 > Apogee Mini-Me > Tascam DR-100mkIII

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15760
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Audix m1280 / 1290 Wind Screen
« Reply #1 on: March 27, 2015, 12:37:40 PM »
Can you measure the inside diameter and depth of the bore on these screens?   Considering them for the DPA 4098H if they will fit.  Thanks.
Logged
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline mccordo

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 614
  • Gender: Male
  • Area Man
Re: Audix m1280 / 1290 Wind Screen
« Reply #2 on: March 27, 2015, 08:55:56 PM »
Quote from: Gutbucket on March 27, 2015, 12:37:40 PM
Can you measure the inside diameter and depth of the bore on these screens?   Considering them for the DPA 4098H if they will fit.  Thanks.

I actually bought Mark's M1280s and am the current owner of those windscreens. The diameter is about 1/4" (with some room for expansion due to the stretchable nature of the foam) and the depth is about 1 3/4". Hope that helps!
Logged
Mics: AKG ck63 Hypercards, AKG ck61 Cards, 2x nBob Actives (460B bodies unused), Rode NT6/MJE-384K Roadster (Michael Joly modded Cards), Audix M1280 Hypercards, Audix M1290 Cards, AT853 Cards, Church Audio CA-11 Cards, AT MT830R Omnis
Pres: Grace Design Lunatec V2, Edirol UA-5, Church Audio CA-9200, Naiant PIPsqueak
Recorders: SoundDevices MixPre-6, SoundDevices MixPre-3, 2x Tascam DR-100mkII, Sony PCM-M10

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 15760
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Audix m1280 / 1290 Wind Screen
« Reply #3 on: March 27, 2015, 09:54:16 PM »
Excellent, thanks!

Now I can double check.. might be a bit loose and short on the DPAs
Logged
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline Life In Rewind

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 883
    • www.rovingsign.com
Re: Audix m1280 / 1290 Wind Screen
« Reply #4 on: March 28, 2015, 12:19:54 AM »
Are the stock screens ok? I still have them...

Those look nice!
Logged

Offline mccordo

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 614
  • Gender: Male
  • Area Man
Re: Audix m1280 / 1290 Wind Screen
« Reply #5 on: March 28, 2015, 07:59:19 AM »
I've actually got 3 sets of windscreens that fit the Audix M series. The ones pictured above and a smaller set that are about 1/2 the exterior size of the ones I measured for Gutbucket came with the M1280s I got from mterry. I also bought a set of M1290s from the YS that came with the original wood boxes and included a tiny set of windscreens that are much thinner and about 1/2 the size of the smaller set from the M1280s. I don't think I've ever used the smallest set, but the 2 larger sets have worked quite well for me both indoors and outdoors.
Logged
Mics: AKG ck63 Hypercards, AKG ck61 Cards, 2x nBob Actives (460B bodies unused), Rode NT6/MJE-384K Roadster (Michael Joly modded Cards), Audix M1280 Hypercards, Audix M1290 Cards, AT853 Cards, Church Audio CA-11 Cards, AT MT830R Omnis
Pres: Grace Design Lunatec V2, Edirol UA-5, Church Audio CA-9200, Naiant PIPsqueak
Recorders: SoundDevices MixPre-6, SoundDevices MixPre-3, 2x Tascam DR-100mkII, Sony PCM-M10
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.077 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF