Taperssection.com

Gear / Technical Help => Remote Power => Topic started by: aberg on November 09, 2005, 11:50:11 AM

Title: MixPre + R-1 off a 5400mah Li-ion
Post by: aberg on November 09, 2005, 11:50:11 AM

Wondering if anybody has used a VR box with a pass through to power both these devices or a similar configuration.. either an MP2 or FP24 or whatever. Wondering what sort of runtime I'd be able to get.

Cheers!

Title: Re: MixPre + R-1 off a 5400mah Li-ion
Post by: bagtagsell on November 09, 2005, 12:21:20 PM

Mp2 w/ phantom pulls 750 ma
Akg se300b pulls            2 ma

Quote

or the RNP I use a small (7.5 AH) sealed lead acid battery and it
should provide about 12 hours at the measured RNP current draw at 12 V
(about 7-7.5 W average).

if this helps...

Title: Re: MixPre + R-1 off a 5400mah Li-ion
Post by: Chris K on November 09, 2005, 04:12:17 PM

Quote from: aberg83 on November 09, 2005, 11:50:11 AM

Wondering if anybody has used a VR box with a pass through to power both these devices or a similar configuration.. either an MP2 or FP24 or whatever. Wondering what sort of runtime I'd be able to get.

Cheers!

not an r-1 but close.

http://taperssection.com/index.php?topic=51864.msg691787#msg691787

i have run the mp-2 and jb3 off this 9v/5400 for 5hrs without turning either off, but the batteries in the jb3 were freshly charged