Become a Site Supporter and Never see Ads again!

Author Topic: RCA > 1/4 Plug Question  (Read 2506 times)

0 Members and 1 Guest are viewing this topic.

backwhereubelong

  • Guest
  • Trade Count: (0)
RCA > 1/4 Plug Question
« on: January 13, 2016, 09:01:17 PM »
Will I experience any loss of signal or degradation by going from RCA (out of cassette deck) into a mini-mixer with 1/4" jacks?  I need a "clean" signal.  Is this advisable or no?

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 12298
  • Gender: Male
Re: RCA > 1/4 Plug Question
« Reply #1 on: January 13, 2016, 09:35:31 PM »
No problemo with the connection.  You'll want to set the input sensitivity or 'input gain trim' on the mixer appropriately for the signal level out of the cassette deck for good gain-staging.  Similar to how you would set the input gain differently on a recorder to accommodate a preamp line-level input rather than a mic-level input.
volition > vibrations > voltages > numeric values | numeric values > voltages > vibrations> virtual teleportation time-machine experience
made easy- >>Improved PAS table<< | made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<<

backwhereubelong

  • Guest
  • Trade Count: (0)
Re: RCA > 1/4 Plug Question
« Reply #2 on: January 13, 2016, 09:49:11 PM »
No problemo with the connection.  You'll want to set the input sensitivity or 'input gain trim' on the mixer appropriately for the signal level out of the cassette deck for good gain-staging.  Similar to how you would set the input gain differently on a recorder to accommodate a preamp line-level input rather than a mic-level input.

As usual, you always have the answer.  Maybe you should just post your phone number and we text you our questions!  LOL.  Seriously, thanks for the info.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 12298
  • Gender: Male
Re: RCA > 1/4 Plug Question
« Reply #3 on: January 14, 2016, 11:21:05 AM »
No way!

..and no problem, happy to help where I can.
volition > vibrations > voltages > numeric values | numeric values > voltages > vibrations> virtual teleportation time-machine experience
made easy- >>Improved PAS table<< | made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<<

 

RSS | Mobile
Page created in 0.109 seconds with 26 queries.
© 2002-2018 Taperssection.com
Powered by SMF