Become a Site Supporter and Never see Ads again!

Author Topic: Nak 300 mics  (Read 1797 times)

0 Members and 1 Guest are viewing this topic.

Offline johnpaul torno

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 1
Nak 300 mics
« on: May 15, 2016, 08:28:29 AM »
Does anyone modify nak 300 mics to phantom? Upgrades? Thanks everyone have an old set I would like to use again. JP

Offline jagraham

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 2997
  • Gender: Male
Re: Nak 300 mics
« Reply #1 on: May 15, 2016, 12:24:25 PM »
Check the Team Nak thread under Team Boards. To give a quick answer to your question, yes they can be modified, but to my knowledge the number of people offering that service is fairly low. You can still find batteries, but you might have to get creative. I use two small 6V batteries taped together. Anything in that voltage range that is the same size as a AA will work.
Mics: Nak CM-300s, Nak CM-100s, CP-1s, CP-2s, AT-853s(Cards, Hypers, Omnis) CA-14s(Cards, Omnis)
Pres: CA STC-9200, CA-UBB
Recorders: Tascam DR-70D, DR-2D, Edirol R-09

ISO: 1 Teac ME-120, CP-3 Caps, AT-853 Subcard Caps

Offline Life In Rewind

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 883
    • www.rovingsign.com
Re: Nak 300 mics
« Reply #2 on: May 15, 2016, 12:28:21 PM »
Here's a recent thread discussing some current approaches to replacing batteries.

http://taperssection.com/index.php?topic=176879.msg2180926#msg2180926

The thing is - with this mic - even if modded so it "runs on phantom" - all of those solutions ultimately power the capsule with 9V - that conversion always seems like kind of waste - especially with battery powered recorders.

I always saw the advantage of the mods was separating the signal and power (so the signal isn't going through the battery.) - not sure this had much effect on the final sound though.

Others put the premium on the reduced size of the overall setup...handy for low-profile tapers.

 

RSS | Mobile
Page created in 0.052 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF