Become a Site Supporter and Never see Ads again!

Author Topic: Hydra cable (got wet...advice needed)  (Read 8766 times)

0 Members and 1 Guest are viewing this topic.

Offline Liquid Drum

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 661
  • Gender: Male
Hydra cable (got wet...advice needed)
« on: June 01, 2008, 11:57:05 AM »
Well. My hydra cable (1/8'' jack to 1/8'' jack, both male) fell into the toilet last night. Yes have a big laugh lol.   :P

It fell out my pocket. Anyways it got totally covered in water. I dried it off but is it still usable? Or do I need a new cable?


Thanks,
Simon.
Mics:
AT933/C

Batt-Boxes, Pre-amps:
CA-9100

Recorders:
Edirol R-09
iRiver H120 (CF Modded)
Sony MZ-RH910 Hi-MD

Video: Canon HV20 E

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #1 on: June 01, 2008, 12:04:47 PM »
is the end the kind you can unscrew?
if so unscrew it and try a blow drier, not on really hot though
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline Liquid Drum

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 661
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #2 on: June 01, 2008, 12:34:28 PM »
is the end the kind you can unscrew?
if so unscrew it and try a blow drier, not on really hot though

I can unscrew the right-angle plug end but not the other end, without breaking into it. On the end I did unscrew it was dry inside. I mean, does the water damage such a cable? I really wouldn't want any drop-outs, etc.
Mics:
AT933/C

Batt-Boxes, Pre-amps:
CA-9100

Recorders:
Edirol R-09
iRiver H120 (CF Modded)
Sony MZ-RH910 Hi-MD

Video: Canon HV20 E

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Hydra cable (got wet...advice needed)
« Reply #3 on: June 01, 2008, 12:34:35 PM »
let it dry and it should work just fine

is the end the kind you can unscrew?
if so unscrew it and try a blow drier, not on really hot though

open and let it dry on its own unless the dryer has a cool air setting.

Offline tfs8271

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2593
  • Gender: Male
  • Hand polished by Chris Lindsey
Re: Hydra cable (got wet...advice needed)
« Reply #4 on: June 01, 2008, 01:35:08 PM »
Stealth attempt gone shitty?
A six pack a day, that's all we ask.

Neumann skm140>ACM Oade PMD660
or Oade Mod R4

Offline Liquid Drum

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 661
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #5 on: June 01, 2008, 02:51:50 PM »
Stealth attempt gone shitty?

LOL.  :P

I was open taping (well kind of) but I haven't a stand yet so had to wear the mics. I went for a piss after the show and as I did up me zipper (which got a bit stuck lol) the cable fell out the side and into the bowl lol.

A mess, but thats £20 sitting in there, heh.

 :P

At least it wasn't my recorder...  :o

Thanks for the replies, +t

So just to confirm, it should be ok once its fully dry? Piss won't cock up the connections?

Thanks.

 ;D
Mics:
AT933/C

Batt-Boxes, Pre-amps:
CA-9100

Recorders:
Edirol R-09
iRiver H120 (CF Modded)
Sony MZ-RH910 Hi-MD

Video: Canon HV20 E

Offline bugg100

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1015
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #6 on: June 01, 2008, 03:49:09 PM »



So just to confirm, it should be ok once its fully dry? Piss won't cock up the connections?

Thanks.

 ;D

Welllllll, I might wash mine with FRESH water, then let it dry real good!

Offline manitouman

  • Trade Count: (36)
  • Needs to get out more...
  • *****
  • Posts: 2018
  • Gender: Female
  • Los Bulls!!!
Re: Hydra cable (got wet...advice needed)
« Reply #7 on: June 01, 2008, 04:17:41 PM »



So just to confirm, it should be ok once its fully dry? Piss won't cock up the connections?

Thanks.

 ;D

Welllllll, I might wash mine with FRESH water, then let it dry real good!

I was just thinking the same thing! Nothing like stale piss smell to attract the ladies... :sick:
Mics: AKG CK31, CK32>LM 3> MPA III


Offline Liquid Drum

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 661
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #8 on: June 01, 2008, 04:25:52 PM »
Damn, thats a good point. Think I'll wipe over the surface lightly with some clean water on a damp cloth. Can't be smelling while taping, lol.
Mics:
AT933/C

Batt-Boxes, Pre-amps:
CA-9100

Recorders:
Edirol R-09
iRiver H120 (CF Modded)
Sony MZ-RH910 Hi-MD

Video: Canon HV20 E

Offline OFOTD

  • Amorican
  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 6307
Re: Hydra cable (got wet...advice needed)
« Reply #9 on: June 01, 2008, 04:29:05 PM »
Nothing like stale piss smell to attract the ladies... :sick:

My nomination for 2008 TS.com Quote Of The Year!    +T

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #10 on: June 01, 2008, 09:32:20 PM »



So just to confirm, it should be ok once its fully dry? Piss won't cock up the connections?

Thanks.

 ;D

Welllllll, I might wash mine with FRESH water, then let it dry real good!

Mental note......never buy Liquid Drum's hydra cable  ;D
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline tfs8271

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2593
  • Gender: Male
  • Hand polished by Chris Lindsey
Re: Hydra cable (got wet...advice needed)
« Reply #11 on: June 01, 2008, 11:05:34 PM »
Nothing like stale piss smell to attract the ladies... :sick:

My nomination for 2008 TS.com Quote Of The Year!    +T

Do I get the assist?
A six pack a day, that's all we ask.

Neumann skm140>ACM Oade PMD660
or Oade Mod R4

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Hydra cable (got wet...advice needed)
« Reply #12 on: June 01, 2008, 11:43:10 PM »



So just to confirm, it should be ok once its fully dry? Piss won't cock up the connections?

Thanks.

 ;D

Welllllll, I might wash mine with FRESH water, then let it dry real good!

Mental note......never buy Liquid Drum's hydra cable  ;D

 ;D
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Hydra cable (got wet...advice needed)
« Reply #13 on: June 02, 2008, 06:26:17 AM »
good one.
If for any reason it seems flaky from its terrible ordeal, i'll replace it w/a new one for you (free).

Offline Liquid Drum

  • Trade Count: (3)
  • Taperssection Member
  • ***
  • Posts: 661
  • Gender: Male
Re: Hydra cable (got wet...advice needed)
« Reply #14 on: June 02, 2008, 08:29:15 AM »
good one.
If for any reason it seems flaky from its terrible ordeal, i'll replace it w/a new one for you (free).


Wow, great offer very kind of you. I will test it tonight. 
Mics:
AT933/C

Batt-Boxes, Pre-amps:
CA-9100

Recorders:
Edirol R-09
iRiver H120 (CF Modded)
Sony MZ-RH910 Hi-MD

Video: Canon HV20 E

 

RSS | Mobile
Page created in 0.128 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF