Become a Site Supporter and Never see Ads again!

Author Topic: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables  (Read 2813 times)

0 Members and 1 Guest are viewing this topic.

Offline Teen Wolf Blitzer

  • It's all ballbearings these days.
  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5262
  • Gender: Male
  • I am Rattus Norvegicus.
    • Support Festival Radio
Do they even make those?  Anyone wanna do it for me?   ;D  On the mic end only.

Offline H.A.V.E.

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 55
  • www.haveinc.com
    • Hudson Audio Video Enterprises, Inc.
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #1 on: April 07, 2009, 10:07:07 AM »
Hi Mark,

Yeah, H.A.V.E. (Hudson Audio Video Enterprises) does custom cable assembly work such as right angled 7 pin Neutriks with tube mic cables. 

Contact Fritz, 800-999-4283, ext. 236
http://store.haveinc.com/default.aspx
<a href="http://store.haveinc.com/default.aspx"><img src="http://store.haveinc.com/images/havelogo350.jpg"/></a>
Fritz Schwarz
Account Manager / Media Services
HAVE, Inc.
p 800-999-4283 x236
fschwarz@haveinc.com
www.HAVEinc.com

Offline darktrain

  • Trade Count: (702)
  • Needs to get out more...
  • *****
  • Posts: 2860
  • Gender: Male
  • Whats next?
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #2 on: April 07, 2009, 10:21:28 AM »
Hi Mark,

Yeah, H.A.V.E. (Hudson Audio Video Enterprises) does custom cable assembly work such as right angled 7 pin Neutriks with tube mic cables. 

Contact Fritz, 800-999-4283, ext. 236
http://store.haveinc.com/default.aspx

3 posts, 3 solicitations, time top take it to the retail thread H.A.V.E.

Offline H.A.V.E.

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 55
  • www.haveinc.com
    • Hudson Audio Video Enterprises, Inc.
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #3 on: April 07, 2009, 10:34:36 AM »
whoops- sorry guys, reading the terms, I thought solicitation: bad, suggestions to question: OK

- no?  apparently not...sorry
<a href="http://store.haveinc.com/default.aspx"><img src="http://store.haveinc.com/images/havelogo350.jpg"/></a>
Fritz Schwarz
Account Manager / Media Services
HAVE, Inc.
p 800-999-4283 x236
fschwarz@haveinc.com
www.HAVEinc.com

Offline H.A.V.E.

  • Trade Count: (3)
  • Taperssection Regular
  • **
  • Posts: 55
  • www.haveinc.com
    • Hudson Audio Video Enterprises, Inc.
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #4 on: April 07, 2009, 11:09:16 AM »
Thanks, Moke!

I posted in the appropriate retail section now- thanks!

Although my background is in audio production, I'd say I'm only intermediatel in the details of interconnect design and specs- there's plenty I can learn.  So I hope to be able to learn a bit here, and perhaps chime in appropriately if I can. 

I've worked in CD/DVD duplication/replciation, printing for years, and was a mastering engineer in NYC and San Francisco.  Currently I do a lot of side recording projects, using mostly P.T. LE, 002R, Mackie 1604VLZ, AT4033, Ensoniq EPS, Yamaha RY30, Fender Rhodes (with a middle C tine cut to an F- darn!).

Fritz
<a href="http://store.haveinc.com/default.aspx"><img src="http://store.haveinc.com/images/havelogo350.jpg"/></a>
Fritz Schwarz
Account Manager / Media Services
HAVE, Inc.
p 800-999-4283 x236
fschwarz@haveinc.com
www.HAVEinc.com

Offline goodcooker

  • Trade Count: (24)
  • Needs to get out more...
  • *****
  • Posts: 2205
  • Gender: Male
  • goes to 11
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #5 on: April 07, 2009, 01:52:04 PM »
Do they even make those?  Anyone wanna do it for me?   ;D  On the mic end only.

Mark

If you haven't found anyone to do this for you yet I'll be happy to.
If you buy the connectors and send them to me with the cables I'll do it for shipping.

MK41 > PFA > Aerco MP2/RAD MS2 > DR60d/DR2d
MBHO KA300 > Naiant PFA > SD MixPre6 (currently under construction)

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City

"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline tgakidis

  • Trade Count: (520)
  • Needs to get out more...
  • *****
  • Posts: 5554
  • Gender: Male
    • My Recordings on the Archive:
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #6 on: April 07, 2009, 01:56:05 PM »
Do they even make those?  Anyone wanna do it for me?   ;D  On the mic end only.

Mark

If you haven't found anyone to do this for you yet I'll be happy to.
If you buy the connectors and send them to me with the cables I'll do it for shipping.



+t for the offer Roger!
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Telefunken R-F-T AR-51 / Telefunken ELA M 260 (m962b,tk60,tk61,tk62) / Telefunken SM2C / Telefunken M60 / AKG c426b / AKG c414-xls / AKG c460b (ck61,ck62,ck63,ck69,a60,ck1,ck22,ck3,ck8) / Nbob AKG Actives/Nbox Platinum / Naiant AKG Couplings/PFA / Blue B6 Capsules / AT853 w/ 4.7k Mod (U873R,Card,Omni,Sub)
Pre-Amps: Sonosax SX-M2 / Lunatec V3
Recs: Sound Devices MixPre-10T / Sound Devices MixPre-6 / Zoom F8 / Edirol R-44 / Tascam DR-680 / Sony PCM-M10

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-date

Offline Teen Wolf Blitzer

  • It's all ballbearings these days.
  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5262
  • Gender: Male
  • I am Rattus Norvegicus.
    • Support Festival Radio
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #7 on: April 07, 2009, 02:09:29 PM »
Thanks guys.  Brian DaSilva is putting stubbies on my Atlas Quadstars for me.  Stubby 7 pins!   :o

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4833
  • Gender: Male
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #8 on: April 07, 2009, 02:26:24 PM »
Thanks guys.  Brian DaSilva is putting stubbies on my Atlas Quadstars for me.  Stubby 7 pins!   :o
i wanna see those! and hear the tubes. ;)
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/? > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline Teen Wolf Blitzer

  • It's all ballbearings these days.
  • Trade Count: (6)
  • Needs to get out more...
  • *****
  • Posts: 5262
  • Gender: Male
  • I am Rattus Norvegicus.
    • Support Festival Radio
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #9 on: April 07, 2009, 02:28:32 PM »
Just finishing up the recording from a few weeks ago.  Will seed tomorrow  100% sure.  Sorry for the delay Dennis.  Couldn't get it done prior to Disneyland.  I tried.   :P

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4833
  • Gender: Male
Re: ISO: someone to put right angle 7 pin Neutriks on my tube mic cables
« Reply #10 on: April 07, 2009, 02:30:56 PM »
Just finishing up the recording from a few weeks ago.  Will seed tomorrow  100% sure.  Sorry for the delay Dennis.  Couldn't get it done prior to Disneyland.  I tried.   :P
;D i'm sure it will be worth the wait. thanks Mark!
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/? > Naiant PFA > Oade Concert Mod Marantz PMD-661

 

RSS | Mobile
Page created in 0.195 seconds with 33 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company