Become a Site Supporter and Never see Ads again!

Author Topic: ISO: RA power supply cable for Portico 5012  (Read 1485 times)

0 Members and 1 Guest are viewing this topic.

Offline dactylus

  • Site Supporter
  • Trade Count: (34)
  • Needs to get out more...
  • *
  • Posts: 4516
  • Gender: Male
  • Saint Paul, MN
ISO: RA power supply cable for Portico 5012
« on: March 15, 2009, 08:44:41 PM »

Hello,

I'm in search of someone to make a 18", RA on both ends, battery cable for a Portico 5012 - I threw one together that gets the job done but I'd like a more "finished" cable than the "RatShack Adaptaplug M" cable that I put together. 

What guage wire would do a more than adequate job for this power cable?  I may wind up producing this myself...


I'm using a Battery Geek  BG 10-14-100 battery.  This info from Rupert Neve on the Portico end:


From: Michael Glass [mailto:michael@rupertneve.com]
To: David Lawrence
Subject: Portico Series Power
 

Mr. Lawrence,

Thank you for contacting Rupert Neve Designs. The power connects to a standard female barrel style connector. The dimensions are as follows:

5.5mm outside diameter , 2.1mm inside diameter, and 11mm depth.
 

The connector is center positive, 12Volts DC, and approximately 1 amp per Portico. The power plug is protected against reversed polarity. Do not, under any circumstances feed using an AC power supply.

If you have any questions, please feel free to contact us at support@rupertneve.com

Thank you,

Michael Glass

Production Coordinator

Rupert Neve Designs, Inc.

hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline dactylus

  • Site Supporter
  • Trade Count: (34)
  • Needs to get out more...
  • *
  • Posts: 4516
  • Gender: Male
  • Saint Paul, MN
Re: ISO: RA power supply cable for Portico 5012
« Reply #1 on: March 20, 2009, 10:30:57 AM »


Anyone?

 :hmmm:
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline deadheaded

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 823
  • Gender: Male
    • Kind Kables
Re: ISO: RA power supply cable for Portico 5012
« Reply #2 on: March 20, 2009, 07:23:03 PM »
hey dave
i've got you covered.
wiil get to it this weekend.
thanks
ed
If it's worth getting off the couch, it's worth taping!

Offline dactylus

  • Site Supporter
  • Trade Count: (34)
  • Needs to get out more...
  • *
  • Posts: 4516
  • Gender: Male
  • Saint Paul, MN
Re: ISO: RA power supply cable for Portico 5012
« Reply #3 on: March 20, 2009, 07:37:11 PM »
hey dave
i've got you covered.
wiil get to it this weekend.
thanks
ed

Ed - let me know how much the cable will be and I'll send PayPal right away.

thanks,

David
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

Offline Myco

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 7569
  • Gender: Male
Re: ISO: RA power supply cable for Portico 5012
« Reply #4 on: March 24, 2009, 09:58:56 AM »
Hey Dave, did you get your cable? How much did it run you? I may end up gettting one myself.

Mike
Microtech Gefell M200: M20/M21/M27 caps> Bumblebee MiAGi-II/Darktrain silver cable's/"Chuck" Belden cables> Aerco MP-2 or Busman modded DR-680 pre-amps> Darktrain cables & interconnects> Tascam DR-680 (Busman mod)
AT853's(card's/hyper's)>AT8533x>Aerco MP-2>Sony M10

Offline dactylus

  • Site Supporter
  • Trade Count: (34)
  • Needs to get out more...
  • *
  • Posts: 4516
  • Gender: Male
  • Saint Paul, MN
Re: ISO: RA power supply cable for Portico 5012
« Reply #5 on: March 24, 2009, 10:16:16 AM »
Hey Dave, did you get your cable? How much did it run you? I may end up gettting one myself.

Mike

Mike,

No cable yet but I'm sure that Ed will produce a very nice one.  You should PM Ed too...

 ;D

hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

 

RSS | Mobile
Page created in 0.084 seconds with 28 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company