Become a Site Supporter and Never see Ads again!

Author Topic: Recorder Mounting Options  (Read 4239 times)

0 Members and 1 Guest are viewing this topic.

Offline techgui

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 105
Re: Recorder Mounting Options
« Reply #15 on: April 21, 2011, 08:40:11 AM »
http://www.bhphotovideo.com/c/product/419200-REG/Smith_Victor_701520_TR_56_Camcorder_Accessory_Mounting.html

I have one of these and they work well.  It screws onto the bottom where the tripod goes into and has a female thread so you can still put it on a tripod.  Get that and some type of adapter like the one I linked already, maybe a smaller one if you can.

I got one of these a few days ago, I removed the top hot shoe mount and drilled a large hole in it's place.  Now I'm going to use silicone caulking to pour mold a shock absorbing grommet/washer to insulate the DR-2d from the mechanical handling noises of the camcorder.  So far, so good. 

Offline techgui

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 105
Re: Recorder Mounting Options
« Reply #16 on: April 23, 2011, 10:24:12 AM »
Here are some pictures.  The silicone thing sounded good but didn't work out, so I went with a foam and felt gasket.  I can't hear any noises from the camcorder including handling noises.  So all is well.

http://i65.photobucket.com/albums/h219/J123z_2006/Tascam%20Dr-2d/DSC01858.jpg
http://i65.photobucket.com/albums/h219/J123z_2006/Tascam%20Dr-2d/DSC01855.jpg
http://i65.photobucket.com/albums/h219/J123z_2006/Tascam%20Dr-2d/DSC01859.jpg

Next project will be to mount my DIY preamp and AKG C1000s mic to my camcorder.  But that will be a llittle later, I'm currently expanding my preamp from mono to stereo.

 

RSS | Mobile
Page created in 0.102 seconds with 24 queries.
© 2002-2018 Taperssection.com
Powered by SMF