Become a Site Supporter and Never see Ads again!

Author Topic: Mytek 192 Lithium ion ideas....  (Read 6736 times)

0 Members and 1 Guest are viewing this topic.

Offline jadedphan

  • Trade Count: (2)
  • Taperssection Regular
  • **
  • Posts: 111
  • Gender: Male
Mytek 192 Lithium ion ideas....
« on: May 31, 2011, 05:51:16 PM »
Hey now,

Well, it's been increasingly harder to find a 5400 mAh portable dvd battery (suggestions welcome for purchase sites).  Any other remote power ideas for a mytek 192?

-jadedphan
Schoeps MK4/41  > KCY > Schoeps VMS-5U > Mytek 192 > SD 744t

Hopefully adding a nbox, to run the other caps as:
Cap->kc5->proper adapter->nbox->744t line ins

Offline audBall

  • Trade Count: (33)
  • Needs to get out more...
  • Posts: 5665
  • Gender: Male
Re: Mytek 192 Lithium ion ideas....
« Reply #1 on: May 31, 2011, 05:55:38 PM »
Tekkeon MP3450?

Powerstream also makes a Tekkeon clone.  I suggest scouring ebay for one.  I recently scored a MP3450 clone plus extended pack for only $20. 

Offline page

  • Site Supporter
  • Trade Count: (25)
  • Needs to get out more...
  • *
  • Posts: 8389
  • Gender: Male
  • #TeamRetired
Re: Mytek 192 Lithium ion ideas....
« Reply #2 on: May 31, 2011, 08:33:28 PM »
whats the tolerance range on voltage? Something from batteryspace.com might work if you get it re-terminated to whatever the mytek receives.
"This is a common practice we have on the bus; debating facts that we could easily find through printed material. It's like, how far is it today? I think it's four hours, and someone else comes in at 11 hours, and well, then we'll... just... talk about it..." - Jeb Puryear

"Nostalgia ain't what it used to be." - Jim Williams

Online yug du nord

  • uncleyug>Snowman>
  • Trade Count: (53)
  • Needs to get out more...
  • *****
  • Posts: 4939
  • made with natural flavor
Re: Mytek 192 Lithium ion ideas....
« Reply #3 on: May 31, 2011, 10:55:20 PM »
Mytek is very flexible...............   find a 9v DVD or pick up a Tekkeon and set it to 9v.  Mytek recommends using the lowest voltage possible.
.....got a blank space where my mind should be.....

Offline jerryfreak

  • Trade Count: (12)
  • Taperssection All-Star
  • ****
  • Posts: 1650
  • I'm a llama! (taboot)
Re: Mytek 192 Lithium ion ideas....
« Reply #4 on: October 09, 2013, 03:20:37 AM »
i know this thread is super old, so call me late to the party as a new mytek owner

im getting 12 hours out of this palm-sized battery:
http://www.batteryspace.com/li-ion18650batterywithwater-proofcoatingrubber74v4400mah3256whtrail-techfemaleplugchinacells.aspx

thats running 8.4>6.9V. it hit 7V after 11 hrs. im not sure at what voltage the internal rail voltage dips and affects performance, but im guessing 6.9V is fine for the extremely rare case i would go that deep (it sounded fine at least)

id go for the 2.4 aH battery but this one is already tiny and its cool to have one battery for a whole day at a festy

by my calcs this unit uses about 400 mA (2.8W). pretty efficient compared to the AD2K's 9W but in terms of weight with Li-ions the mytek setup is still heavier as the unit weighs twice as much as the ad2k



« Last Edit: October 09, 2013, 03:25:46 AM by jerryfreak »

 

RSS | Mobile
Page created in 0.076 seconds with 28 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company