Become a Site Supporter and Never see Ads again!

Author Topic: Naztech/SD 788 powering question  (Read 442 times)

0 Members and 1 Guest are viewing this topic.

Offline Mic D

  • Habitual Line Stepper
  • Trade Count: (17)
  • Taperssection All-Star
  • ****
  • Posts: 1995
  • Gender: Male
Naztech/SD 788 powering question
« on: March 08, 2017, 09:38:17 AM »
Was wondering what voltage other Naztech PB 1500 users are powering their 788's at. 12v? 16v? Also was wondering what run times they were getting. Picked up a PB 1500 recently w/ custom cable to run with a 788T. Thanks.

Offline old and in the way

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 74
Re: Naztech/SD 788 powering question
« Reply #1 on: March 08, 2017, 12:57:32 PM »
i have a 744t i power w pb 15000. 2 track most times /phantom .im guessing i get about 8 hrs.plus i can switch over to the sony battery for probably another 4 after the pb 15000is depleted
im guessing you could get close to that. 4 tracks with phantom. plus that depends on the mics and lights etc.

Offline wlp

  • Trade Count: (7)
  • Taperssection Regular
  • **
  • Posts: 54
  • Gender: Male
Re: Naztech/SD 788 powering question
« Reply #2 on: March 12, 2017, 10:40:50 AM »
I also power a SD 744t with a Naztech 15000 and found that I had to set it at 16v to get reliable operation.  Same thing with a SD 302 mixer.

 

RSS | Mobile
Page created in 0.099 seconds with 25 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company