Gear / Technical Help > Ask The Tapers

speaker repair

(1/1)

JackoRoses:
I have a speaker that is not working. (no sound)
I accidentally ran over the speaker cable with a vacuum and that was the end of the sound.
What should I look for to try and fix this speaker? I've tried different cables, no change.
The stereo still outputs sound on the channel, I swapped in a different speaker and it works fine.

Gutbucket:
Initial suspicion would be a loose wire connection.  I'd unscrew the input terminal cup/plate and check that the input terminal connections to the crossover aren't compromised. On some speakers you need to unscrew and remove the woofer to get in there.

Navigation

[0] Message Index