Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Sonosax SXM2 question  (Read 2091 times)

0 Members and 1 Guest are viewing this topic.

Offline johnw

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 3818
  • Gender: Male
    • My cd List
Sonosax SXM2 question
« on: August 16, 2010, 07:05:23 PM »
Is the 1/8" line out signal reduced by 6dB compared to the XLRs? Any other sonic differences?
Logged
Schoeps MK41 & MK4V  |  Schoeps CMC6, Schoeps KCY, AKI/2C, PFA, Nbox Cable/PFA  |  Grace V2, Nbox Platinum  |  SD744T, SD MixPre 6, Sony PCM M10

Canon 16-35mm/2.8L mkii, 24-70mm/2.8L, 70-200mm/2.8L IS, 50mm/1.8 mkii, 135mm/2L, 100mm/2.8L IS, Sigma 35mm/1.4 A  |  Canon 5D mk4

Offline Jhurlbs81

  • Trade Count: (20)
  • Needs to get out more...
  • *****
  • Posts: 3076
  • Gender: Male
    • My LMA collection
Re: Sonosax SXM2 question
« Reply #1 on: September 02, 2010, 12:41:20 PM »
I'm interested in this as well...is it better to go XLR>1/8th or just 1/8th > 1/8th?  Certainly a mini plug is easier for stealthing but if the recorder can handle a hotter signal does that mean you should give it one? I'm planning on using one with a m-10 and am going to stick with the miniplug off the lemosax.

Jesse
Logged
FREE JERRYFREAK!

Offline chronictonicbear

  • Trade Count: (9)
  • Taperssection Regular
  • **
  • Posts: 123
Re: Sonosax SXM2 question
« Reply #2 on: September 19, 2010, 04:40:32 PM »
not sure on exact specs, however with my experience owning a sxm2 & lemo version the 1/8th vs xlr is like line level vs tape level (roughly -10db) i always prefer xlr because the lock into place so they won't pop out or turn in the jack when the cable is moved possibly creating noise, a nice streamline custom cable cam always be made
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.048 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF