Become a Site Supporter and Never see Ads again!

Author Topic: Schoeps VMS 5U and VMS 02 IB Powering  (Read 3866 times)

0 Members and 1 Guest are viewing this topic.

Offline habit

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 366
  • Gender: Male
    • My Archive Shows
Schoeps VMS 5U and VMS 02 IB Powering
« on: May 31, 2009, 11:21:57 AM »
The Energizer "Ultimate Lithium" batteries are getting a little expensive to run so I would like to pick up a couple external batts for powering. I currently run the BG 10-14-88  (10-14V 8000mAh(88.8Wh) to power my R4 Pro and have an additional BG10-14-88 as a back-up.  Would the additional BG10-14-88 be appropriate for powering either of the VMS boxes? Below are the powering specs per Schoeps.

Operation with internal batteries (possibly rechargeable):
Number and type of cells: 6 x AA
Recommended battery type: Alkaline
Recommended rechargeable type: NiMH

A user-replaceable fuse protects against reversing the polarity
of the batteries.

Battery life with alkaline cells: ca. 8.5 hours
Battery life with rechargeable batteries: ca. 3 h (700 mAh
NiCd); ca. 5.5 h (1300 mAh NiMH)

External powering:
Coaxial socket, 5.5/2.1 mm

External power supply (not included):
DC (stabilized): 6V, 500 mA – 15 V, 250 mA
The unit can also be operated with an unfiltered voltage from 6 V up to 15 V at the external supply input socket.
AC: 10 - 13 V
External powering with outboard rechargeable battery:
nominal 6 - 12 V

Parallel operation
from a single power supply of a VMS 5 U along with one
or more other pieces of equipment is generally possible,
because of the internal galvanic isolation by the regulator.

An appropriate AC power adapter is available (designation:
VMS 5 DC). Other power adapters with 6 - 15 V stabilized
DC output at 500 mA can also be used.

Thanks in advanced for any help.
Jeff
Busman Mod R4 Pro | Schoeps M222 | Schoeps MK4 & 41

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #1 on: May 31, 2009, 12:56:41 PM »
slut
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline habit

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 366
  • Gender: Male
    • My Archive Shows
Busman Mod R4 Pro | Schoeps M222 | Schoeps MK4 & 41

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #3 on: May 31, 2009, 01:18:41 PM »
you have email ;)
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline taylorc

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 423
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #4 on: May 31, 2009, 03:08:57 PM »
Would the additional BG10-14-88 be appropriate for powering either of the VMS boxes?

should be fine.  i use an impact bpd-8000 to power the vms02ib. 
never tested it to see how long it can go, but a show barely drains anything off it.

Offline dennisrtyler

  • Trade Count: (21)
  • Needs to get out more...
  • *****
  • Posts: 4831
  • Gender: Male
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #5 on: May 31, 2009, 03:15:52 PM »
Would the additional BG10-14-88 be appropriate for powering either of the VMS boxes?

should be fine.  i use an impact bpd-8000 to power the vms02ib. 
never tested it to see how long it can go, but a show barely drains anything off it.
that's the one i recommended to him but they are now discontinued.  :-\
4. im so abrasive i make sandpaper nervous.

Schoeps CMR/mk4 > Naiant PFA > Oade Concert Mod Marantz PMD-661

Offline taylorc

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 423
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #6 on: May 31, 2009, 03:31:41 PM »
that's the one i recommended to him but they are now discontinued.  :-\

i also have several of the $12 5400mah ones off ebay (initial rb-270), but these are for backup... not sure yet how much powering time the vms02ib will get off it but they work.

Offline deadheaded

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 826
  • Gender: Male
    • Kind Kables
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #7 on: May 31, 2009, 06:31:39 PM »
hey taylor
you should be able to get at about 10-12 hours with the rb-270 and your vms2 1b.

i get about 10 hours on the vms5u with duracell 2650 mah rechargeable nimh batteries.
If it's worth getting off the couch, it's worth taping!

Offline habit

  • Trade Count: (14)
  • Taperssection Member
  • ***
  • Posts: 366
  • Gender: Male
    • My Archive Shows
Re: Schoeps VMS 5U and VMS 02 IB Powering
« Reply #8 on: May 31, 2009, 07:46:28 PM »
Thanks fellas. Looks like I can get by with 1 rb-270 at the moment and use my other battery Geek batt.

Thanks again,
Jeff
Busman Mod R4 Pro | Schoeps M222 | Schoeps MK4 & 41

 

RSS | Mobile
Page created in 0.065 seconds with 34 queries.
© 2002-2024 Taperssection.com
Powered by SMF