Taperssection.com
Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: waltmon on August 14, 2015, 04:47:51 PM
-
What setting is the correct one for the full sized wave? Somehow when I saved my project its in a reduced size - has to be bigger, its a 4 channel recording. Sounds great, just not the full wave.
Thanks and sorry if this is a dumb question - recording is really nice, don't want to share it until it's correct.
Walt
-
Not sure I fully understand the question. Most editors save multitrack settings as "projects", which are actually just the settings that apply to the original wav tracks (so that "project" is a small overlay, not the entire wav file). If you mix it down you're likely going to wind up with a two-track stereo wav which will necessarily be smaller than the 4 original tracks (if that's small perhaps the default is to mix it to 16/44.1). You should be able to see and adjust what settings are applied to the output when you do the mixdown or save as... Look for those/don't go too fast through the work flow when you mix/save it...
-
^^ I take it you've never used cd wave?
Walt
save as Output mode direct wave (default) and if 24bit make sure you check the box for "use alternative 24bit format"
-
save as Output mode direct wave (default)
Why save it as a WAV file instead of FLAC?
-
save as Output mode direct wave (default)
Why save it as a WAV file instead of FLAC?
I save to WAV to create a WAV MD5, and TLH level 8 creates smaller FLAC files than CDWave... As HDD space is valuable, I go with TLH level 8 whenever I FLAC anything...
Terry
-
I've used cdwav a bunch...audacity...not much. Figured out I was mixing to a mono channel...everything straight now. I was a soundforge kid....now self teaching audacity. Appreciate the info.
-
save as Output mode direct wave (default)
Why save it as a WAV file instead of FLAC?
It only took one corrupted .flac a long time ago, to convince me to save both .wav and .flac files. :facepalm: 8)
-
MD5 file question...I've had no trouble creating this and testing files. My issue now is getting the test results to a format I can cut and paste to my set list file.
-
MD5 file question...I've had no trouble creating this and testing files. My issue now is getting the test results to a format I can cut and paste to my set list file.
If you are using Windows, open it with Notepad.
-
So out put the MD5 file test to notepad? Not sure why Im having trouble this go round. I used to run the test, then just copy and paste the results...its not letting me copy and paste out of TLH
-
So out put the MD5 file test to notepad? Not sure why Im having trouble this go round. I used to run the test, then just copy and paste the results...its not letting me copy and paste out of TLH
Right click on the .md5 file> Open with...> Notepad
It may prompt you to find the program to open it. Just select notepad.
You can also associate the .md5 to notepad on your control panel: Programs> Default Programs> Associate a file type or protocol with a program
I haven't done an MD5 in quite some time, though. All my uploading goes to archive, which generates it automatically.
-
thanks!
-
CDWav is the fastest, best way to track out a show.
The customer support is superlative.
Last week, they sent me a lost activation key from 2005 to allow a re-install. For an inexpensive program, that is unheard of.
FWIW, it works on Winders 10 Pro.
-
I'm fine with cdwav tracking...it was finding away to copy and paste test data into a file.