Taperssection.com
Gear / Technical Help => Cables => Topic started by: NOLAfishwater on June 01, 2009, 09:44:23 PM
-
I need a Y power cable. I took a trip over to ratshack and figured out that I need a straight O connector split into two right angle M's. The battery that I bought has one of those barrel power cables which the O fits into. The cable should be 3' long with the split taking place close to/at the O end that way if I run the t00bes on different shelves I don't have to worry about the split not being wide enough. I will gladly pay someone to do this as I am not going to learn how to solder on this piece of equipment.
specs on M tip:
http://www.radioshack.com/product/index.jsp?productId=2062435
specs on O <<<didn't work.
I'll have to go back. After testing a few more tips at the house, I have determined that it is probably an N tip:
O.D.: 5.5mm. I.D.: 2.5mm
-
found the connector tips but like I said, I don't solder.
Need 2 of these
http://www.mcmelectronics.com/product.aspx?productid=AR70626
and
not sure on the other end. should find out by tomorrow.
One of this
http://www.mcmelectronics.com/product.aspx?productid=27-1120
like I said, I don't solder, so I am not going to try this at home.
-
hey louis
i can make that for you.
i have the 5.5/2.1mm connectors.
i don't stock this one: http://www.mcmelectronics.com/product.aspx?productid=27-1120
if you want to get one and have it sent to me, i'll get on it.
ed
-
hey louis
i can make that for you.
i have the 5.5/2.1mm connectors.
i don't stock this one: http://www.mcmelectronics.com/product.aspx?productid=27-1120
if you want to get one and have it sent to me, i'll get on it.
ed
thanks ed. do you need any other connector tips b/c shipping for the $.83 connector is 8.99. so that means I need to make it worth my while to order. fuckity :lamer:
-
hey louis
looks like i also have the 2.8 mm connector as well. it is right angle though, if that is ok.
let me know and i will get on it.
thanks
ed
-
hey louis
looks like i also have the 2.8 mm connector as well. it is right angle though, if that is ok.
let me know and i will get on it.
thanks
ed
that is great news. PM coming
-
PM's were sent with no response.
-
looks like the radio shack O was the wrong size. I have updated my posts. Thinking it is probably the N. Gonna test it out tomorrow.
-
Busman got my back.