Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: RobC on July 15, 2009, 01:42:54 PM
-
anyone have a wall wart for their V2?
Im wondering if I can make one up for myself, but I don't want to fry my V2
what would be a good wall wart to get and attatch a 4 pin XLR to so i can run my V2 from AC power?
thanks in advance for any help
-
I'm guessing any wallwart that provides sufficient voltage and current should work fine. The V2 draws ~500 mA, so get a wallwart with a higher current rating, say 1-2 A. For voltage, this PDF from the Grace website on powering the V2 from AC (http://www.gracedesign.com/support/v2_ac_operation.pdf) suggests you need to run the V2 in 12v mode using a 12-15v wallwart.
-
thanks for the info
I think I will look around for a 12v wall wart and hack the end and put on a 4 pin xlr