Gear / Technical Help > Remote Power
Idea for VMS (& other 12v m-tip reverse polarity gear)
kleiner Rainer:
Newark sells a compatible connector:
https://www.newark.com/lumberg/nes-1-g/plug-low-voltage-1-95mm/dp/97K6463?st=nes%201
Made by Lumberg, this connector is called NES 1 G. There is a plastic shroud around the barrel, but I suppose this can be cut away or if I read the drawing correct, it should slide into the casing. Even here in Germany they are a rare sight nowadays, most DC plugs and jacks are 5.5/2.1 or 5.5/2.5
Hope that helps.
Rainer
noahbickart:
--- Quote from: kleiner Rainer on April 07, 2019, 01:17:52 PM ---Newark sells a compatible connector:
https://www.newark.com/lumberg/nes-1-g/plug-low-voltage-1-95mm/dp/97K6463?st=nes%201
Made by Lumberg, this connector is called NES 1 G. There is a plastic shroud around the barrel, but I suppose this can be cut away or if I read the drawing correct, it should slide into the casing. Even here in Germany they are a rare sight nowadays, most DC plugs and jacks are 5.5/2.1 or 5.5/2.5
Hope that helps.
Rainer
--- End quote ---
Thanks. I've ordered a few of these and I'll report back.
noahbickart:
I finally did this. Works perfectly.
rocksuitcase:
sweetness. Good job!
noahbickart:
I’ve got extra tips if anyone else needs one.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version