Become a Site Supporter and Never see Ads again!

Author Topic: AA catched into MP-2  (Read 2897 times)

0 Members and 1 Guest are viewing this topic.

Offline macacopowa

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 563
  • Gender: Male
    • Barcelona Projecte Musical
AA catched into MP-2
« on: August 03, 2006, 04:31:20 PM »
This is incredible, one AA batt is catched into my mp2.  Anybody know how to remove it?  if I open the mp-2 could remove it?
It's a AA rechargeable, but I tried with the same brand an all go ok (energizer 2500). Any idea? I can use any kind of lubricant?

respectable rig:
Neumann km184 > Hi Ho Silver Clad Cables thegreatgumbino style> SD722

stealth way
CMC-8>3wire bb>R1/ ihp120





recordings on LMAhttp://www.archive.org/bookmarks/danimacaco

http://myspace.com/musickapes       http://db.etree.org/macacopowa

Offline bluegrass_brad

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 3581
  • Gender: Male
  • Old and in the way.
Re: AA catched into MP-2
« Reply #1 on: August 03, 2006, 04:54:17 PM »
the sd mod is just for the spring on the screw end of the battery unit
CK1x, CK2x, CK3x > Hub Industry Cables > Naiant PFA or MK46 > 460B
CK1, CK8, CK63 > 460b

"That was back in a time when society was not quite ready for this music. Anyone remember those days? That's when punk rock was dangerous, right?" - Mike Ness

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: AA catched into MP-2
« Reply #2 on: August 03, 2006, 11:43:50 PM »
try using a little dabof 5minute epoxy on the end of a small  bamboo skrewer. Put a dab on the end of the skrewer hold it against the battery, let dry in 10 minutes slowly pull the battery out.  A little squirt of silicone around the outside of the battery might also help.  but don't squirt the silcone spray until the epoxy is set.....just a thought..
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline macacopowa

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 563
  • Gender: Male
    • Barcelona Projecte Musical
Re: AA catched into MP-2
« Reply #3 on: August 04, 2006, 09:02:57 AM »
thanks for all the advice, finally all it's ok, i go to my local electronic store, good job for 8$ ;D
« Last Edit: August 04, 2006, 09:05:02 AM by macacopowa »
respectable rig:
Neumann km184 > Hi Ho Silver Clad Cables thegreatgumbino style> SD722

stealth way
CMC-8>3wire bb>R1/ ihp120





recordings on LMAhttp://www.archive.org/bookmarks/danimacaco

http://myspace.com/musickapes       http://db.etree.org/macacopowa

treespine

  • Guest
  • Trade Count: (0)
Re: AA catched into MP-2
« Reply #4 on: August 04, 2006, 09:07:03 AM »
try using a little dabof 5minute epoxy on the end of a small  bamboo skrewer. Put a dab on the end of the skrewer hold it against the battery, let dry in 10 minutes slowly pull the battery out.  A little squirt of silicone around the outside of the battery might also help.  but don't squirt the silcone spray until the epoxy is set.....just a thought..

holy shit, that is a great idea.  t+

Offline scb

  • Eli Manning should die of gonorrhea and rot in hell. Would you like a cookie, son?
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 8677
  • Gender: Male
Re: AA catched into MP-2
« Reply #5 on: August 04, 2006, 03:47:47 PM »
magnet?

Offline joekar

  • Trade Count: (2)
  • Taperssection All-Star
  • ****
  • Posts: 1585
  • Gender: Male
Re: AA catched into MP-2
« Reply #6 on: August 04, 2006, 04:29:51 PM »
OK......I'm sitting on the edge of my seat........How did they get the battery out ??... Enquiring minds need to know....

Peace,
jk
Roman Moroni: I would like to direct this to the distinguished members of the panel: You lousy corksuckers. You have violated my farging rights. Dis somanumbatching country was founded so that the liberties of common patriotic citizens like me could not be taken away by a bunch of fargin iceholes... like yourselves.

Offline macacopowa

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 563
  • Gender: Male
    • Barcelona Projecte Musical
Re: AA catched into MP-2
« Reply #7 on: August 14, 2006, 08:26:59 AM »
Well, I think that unscrew the compartment of the internals, the internal was catched because have a piece of tape and it hit with the end of compartment that have less diameter. Sorry for my poor explanation, I not have any idea about electronics
respectable rig:
Neumann km184 > Hi Ho Silver Clad Cables thegreatgumbino style> SD722

stealth way
CMC-8>3wire bb>R1/ ihp120





recordings on LMAhttp://www.archive.org/bookmarks/danimacaco

http://myspace.com/musickapes       http://db.etree.org/macacopowa

Offline aberg

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2974
  • Gender: Male
  • Team Canada
Re: AA catched into MP-2
« Reply #8 on: August 14, 2006, 10:38:08 AM »
Well, I think that unscrew the compartment of the internals, the internal was catched because have a piece of tape and it hit with the end of compartment that have less diameter. Sorry for my poor explanation, I not have any idea about electronics

If I'm hearing you right, you're saying that your battery had a peice of tape around it and that's why it got stuck?

Offline macacopowa

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 563
  • Gender: Male
    • Barcelona Projecte Musical
Re: AA catched into MP-2
« Reply #9 on: August 14, 2006, 11:01:37 AM »
yes, I put it to differentiate from another pair of AA rechargeables, now, learn with my mistake and my AA now are like this.
respectable rig:
Neumann km184 > Hi Ho Silver Clad Cables thegreatgumbino style> SD722

stealth way
CMC-8>3wire bb>R1/ ihp120





recordings on LMAhttp://www.archive.org/bookmarks/danimacaco

http://myspace.com/musickapes       http://db.etree.org/macacopowa

 

RSS | Mobile
Page created in 0.113 seconds with 38 queries.
© 2002-2024 Taperssection.com
Powered by SMF