Email convro I had with Jim/Doug:
Hard to put a number on it, it is more a matter of folks needing it. Most all of them are used for only two inputs, so it probably will never come up in any significant numbers. I like to know I can do 100 or more MODS as I spend a lot of time working them out and it is never as easy as it seems. When we use it at the board, we do not place it in anything, it just sits there, so it is easier to adjust, but still not easy ! Peace..Doug
----- Original Message -----
From: Kevin Davis
To: 'Doug Oade'
Sent: Tuesday, July 22, 2003 12:10 PM
Subject: RE: UA-5 Matrixing
About how many requests do you need for it to be feasible?
-Kevin
-----Original Message-----
From: Doug Oade [mailto:doug@oade.com]
Sent: Tuesday, July 22, 2003 7:14 AM
To: Kevin Davis
Subject: Re: UA-5 Matrixing
Hi ! Yes, folks have mentioned that before and no, it's not worth the time as so far, only 3 folks have mentioned it.....sorry....Doug
----- Original Message -----
From: Kevin Davis
To: 'doug@oade.com'
Sent: Monday, July 21, 2003 3:52 PM
Subject: RE: UA-5 Matrixing
Hi Doug, I first took this to Jim and he suggested to bring it to you. My
previous email is below.
Thanks for any help.
-Kevin
-----Original Message-----
From: Jim Oade [mailto:jim@oade.com]
Sent: Monday, July 21, 2003 12:50 PM
To: Kevin Davis
Subject: Re: UA-5 Matrixing
hi kevin, you are the first one that i have heard this from,
but you can send an email to doug@oade.com, as he is the
one who does the mod, to see if it is feasible to do this....jim
At 12:40 PM 7/21/03 -0700, you wrote:
>Hey Jim. Got a question for you. I would really like to be able to run
>matrix with my UA-5: running one set of mics in the XLRs in the front and
>the other set or SBD feed in the RCAs in the back. The problem is the knob
>in the back is such a pain in the butt to get to, especially when you have
>everything packed so neatly in a bag. Just curious if you had heard of
>anybody else complaining about this and/or if you thought it would be worth
>your time to make a mod to bring the control knob around to the front
>somehow.
>
>Thanks for your time.
>
>-Kevin
>
>Kevin Davis
>ISeries Application Developer
>425-427-7320
>kdavisx@costco.com
Thank You for Your interest
Jim Oade
jim@oade.com
229-228-4480