Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Is there a way to listen to what you are taping when using a JB3?  (Read 3483 times)

0 Members and 1 Guest are viewing this topic.

Offline Chomps

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 4239
  • Gender: Male
Is there a way to listen to what you are taping when using a JB3?
« on: March 28, 2005, 06:23:52 PM »
i got a JB3 today and i am testing it out. but i can not hear what i am taping. is there a way to do this through head phones. I do not find a setting to allow this and when i put headphones in i do not hear anything.
Logged
Microtech Gefell m200/M20/M21/nBob Actives>PFA
Microtech Gefell m950
AKG 414 XLII
Telefunken M60/M61/M62
AT853
SD MP 10ii//Edirol R-44/Sony M10

hexyjones

  • Guest
  • Trade Count: (0)
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #1 on: March 28, 2005, 06:34:59 PM »
Are you certain the JB3 is getting signal?

assuming you are plugged into the headphone jack on the right side of the JB3...

You should only have to push the + and - buttons on the right of the JB3 (they have a little speaker on it...)

A little meter will show up on the screen...

Logged

Offline Chomps

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 4239
  • Gender: Male
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #2 on: March 28, 2005, 06:38:03 PM »
i am plugged into the right side and I am getting nothing.

i can hear what i recorded after i hit stop. but while i am recording i can not hear anything
Logged
Microtech Gefell m200/M20/M21/nBob Actives>PFA
Microtech Gefell m950
AKG 414 XLII
Telefunken M60/M61/M62
AT853
SD MP 10ii//Edirol R-44/Sony M10

hexyjones

  • Guest
  • Trade Count: (0)
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #3 on: March 28, 2005, 06:42:39 PM »
mmm...that doesnt sound right...

I looked at my "Jukebox Settings" and I dont see any option to disable the headphones...(using the 1.3 version of the firmware)

Might be a problem...
Logged

Offline Chomps

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 4239
  • Gender: Male
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #4 on: March 28, 2005, 06:44:07 PM »
but i do not think there is a problem with the headphone jack itself cause i can listen and play back what is on thr JB3. i

should i try to get a firmware update and if so where do i find those?
Logged
Microtech Gefell m200/M20/M21/nBob Actives>PFA
Microtech Gefell m950
AKG 414 XLII
Telefunken M60/M61/M62
AT853
SD MP 10ii//Edirol R-44/Sony M10

Offline fozzy

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 3810
  • Gender: Male
  • move along, nothing much to see here
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #5 on: March 28, 2005, 06:45:08 PM »
Quote from: Chomps on March 28, 2005, 06:44:07 PM
but i do not think there is a problem with the headphone jack itself cause i can listen and play back what is on thr JB3. i

should i try to get a firmware update and if so where do i find those?

the firmware info is in the JB3 FAQ

http://taperssection.com/index.php?topic=16340.0
« Last Edit: March 28, 2005, 06:47:24 PM by fozzy »
Logged
MK 4V > KCY 250/5 Ig (KS 10I)  > VST62IUg > 722

Offline jeromejello

  • Team Florida - always brings the heat
  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 3514
  • Gender: Male
  • surly tapir
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #6 on: March 28, 2005, 07:08:50 PM »
you may want to try the line out jack too... just an idea
Logged
open: mbho 603a (ka200n/ka500hn) > SD MP-2 > PCM-M10
stealth: AT853a (o/sc/c/h) > SD MP-2 > ihp120
misc: Earthworks SR77 | Shure VP88

bt & dime

Offline Chomps

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 4239
  • Gender: Male
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #7 on: March 28, 2005, 07:18:07 PM »
Quote from: jeromejello on March 28, 2005, 07:08:50 PM
you may want to try the line out jack too... just an idea


nothing..oh well..guess i will just watch the levels and see what comes out
Logged
Microtech Gefell m200/M20/M21/nBob Actives>PFA
Microtech Gefell m950
AKG 414 XLII
Telefunken M60/M61/M62
AT853
SD MP 10ii//Edirol R-44/Sony M10

Offline jamazey

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 19
  • Gender: Male
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #8 on: March 31, 2005, 01:29:17 PM »
I am getting the same problem.  I have tried line out it doesn't seem to work there either.  It works perfectly after I record in both slots, but just not during recording.
Logged

Offline Karl

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 377
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #9 on: March 31, 2005, 02:24:03 PM »
I'll put money on it--you probably have to upgrade your firmware for it to work.
Logged
My portable rig:

AT853>Zoom F6

Offline poorlyconditioned

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1958
  • I'm a tapir!
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #10 on: March 31, 2005, 03:02:22 PM »
Quote from: Karl on March 31, 2005, 02:24:03 PM
I'll put money on it--you probably have to upgrade your firmware for it to work.

Unlikely this is the issue, but did you set "Monitor Recording" to ON when you started?  I'm using the latest BIOS version (1.44 or something?).  I am using Shure E2 in-ear monitors to listen while recording.  I need better monitors though.  E2's just don't reveal the higs.  The also don't isolate well enough.  Maybe some ear molds...

  Richard
Logged
Mics: Sennheiser MKE2002 (dummy head), Studio Projects C4, AT825 (unmodded), AT822 franken mic (x2), AT853(hc,c,sc,o), Senn. MKE2, Senn MKE40, Shure MX183/5, CA Cards, homebrew Panasonic and Transsound capsules.
Pre/ADC: Presonus Firepod & Firebox, DMIC20(x2), UA5(poorly-modded, AD8620+AD8512opamps), VX440
Recorders: Edirol R4, R09, IBM X24 laptop, NJB3(x2), HiMD(x2), MD(1).
** This individual has moved to user "illconditioned" **

Offline jamazey

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 19
  • Gender: Male
Re: Is there a way to listen to what you are taping when using a JB3?
« Reply #11 on: April 10, 2005, 11:03:17 PM »
Ok. Well my problem is fixed. The first thing was I wasn't running the mic right. Then there was the upgrading the firmaware. That put everything in a whole new light. Thanks to all.
Logged
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.095 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF