Become a Site Supporter and Never see Ads again!

Author Topic: Sounds like clipping...but it isn't...  (Read 6397 times)

0 Members and 1 Guest are viewing this topic.

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Sounds like clipping...but it isn't...
« on: March 19, 2018, 12:56:39 AM »
This past weekend I recorded a DJ set using both the 1/4" inputs with a direct feed from the turntable on my DR-40 as well as the internal mics. During some portions of the set the direct feed has this horribly frustrating crunching sound while the audience feed doesn't have this sound (see linked attachments). While it sounds like clipping, the waveform and the levels on the DR-40 don't know any evidence of clipping. I've thought about just using the internals for those portions, but it just doesn't sound right. I've also tried using the noise reduction function on Audacity, but haven't found it to be effective.

Anyone have an ideas about what might cause this and what I might be able to do about it using free audio editing tools (on Windows)?

Thanks!

Direct feed:
https://drive.google.com/file/d/1Fw4SglW5Ffn_KlD3ZYLWecs9uGhfNtpd/view?usp=sharing

Internal mics:
https://drive.google.com/open?id=1-A-c137JECiec15VeCIXIFu1UsSrgguh

Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline Gordon

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 11780
  • Gender: Male
    • my list
Re: Sounds like clipping...but it isn't...
« Reply #1 on: March 19, 2018, 07:33:05 AM »
Sounds like brickwalling.
Microtech Gefell M20 or M21 > Nbob actives > Naiant PFA > Sound Devices MixPre-6 II @ 32/48

https://archive.org/details/fav-gordonlw

https://archive.org/details/teamdirtysouth

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Sounds like clipping...but it isn't...
« Reply #2 on: March 19, 2018, 07:35:45 AM »
Sounds like brickwalling.

Yup. Overloaded the inputs without actually hitting the maximum levels on the recorder.

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #3 on: March 19, 2018, 01:45:35 PM »
Overloaded them with what exactly?

Did I break my recorder? Haven’t checked how the inputs are acting at home.

Anything I can do to clean things up?
« Last Edit: March 19, 2018, 01:51:48 PM by ycoop »
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3177
  • Gender: Male
  • Jarts don't kill people!
Re: Sounds like clipping...but it isn't...
« Reply #4 on: March 19, 2018, 02:06:27 PM »
Open it up in your editor and post a screenshot of what the waveform looks like. 
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://www.concertarchives.org/kskreider
https://archive.org/details/thespps

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #5 on: March 19, 2018, 10:15:57 PM »
Open it up in your editor and post a screenshot of what the waveform looks like.

https://drive.google.com/file/d/1gav2R4MGlPUqXwD-rUgJF45elSJpTI3H/view?usp=sharing

The highlighted portion has the sound throughout. The phenomenon is not limited to that portion, it rears its ugly head throughout the recording.

Calmed my own nerves by recording the headphone out from my bass amp and everything seems to be good with the inputs.  :coolguy:
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Sounds like clipping...but it isn't...
« Reply #6 on: March 19, 2018, 11:32:38 PM »

https://drive.google.com/file/d/1gav2R4MGlPUqXwD-rUgJF45elSJpTI3H/view?usp=sharing

The highlighted portion has the sound throughout. The phenomenon is not limited to that portion, it rears its ugly head throughout the recording.


Can you post an audio file of just that section?

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #7 on: March 20, 2018, 02:02:01 AM »

https://drive.google.com/file/d/1gav2R4MGlPUqXwD-rUgJF45elSJpTI3H/view?usp=sharing

The highlighted portion has the sound throughout. The phenomenon is not limited to that portion, it rears its ugly head throughout the recording.


Can you post an audio file of just that section?

https://drive.google.com/open?id=1vf_mzCpatyr-P44wRp1xAFfGao7pRPcs
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Sounds like clipping...but it isn't...
« Reply #8 on: March 20, 2018, 07:30:46 PM »
That's not just that section. What timestamp on that file should I be listening to?

Offline rumbleseat

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
  • Gender: Male
    • Sonicsational Audio
Re: Sounds like clipping...but it isn't...
« Reply #9 on: March 20, 2018, 07:42:54 PM »
I hear distortion in the lowest frequencies only - slight distortion of the "kick drum" and definitely distortion in the "bass guitar" with the lowest notes being worse.

Did you have your EXT IN switch set to MIC when it might have been better to have it set to LINE??

I don't have any ideas for fixing it...
AKG C480B CK61 cards or AKG C568EB or Church CA-11 cards >  Canare L-4E6S with Neutrik EMC > Tascam DR-680 MKII or DR-44WL > memories

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Sounds like clipping...but it isn't...
« Reply #10 on: March 20, 2018, 08:01:22 PM »
It doesn't really sound like it's overloading in the loudest bits, though, which is what brickwalling would be. Is it possible there's something ungrounded in your turntable feed? That's what the output from my old turntable sounded like before I replaced it with my new turntable.

Offline rumbleseat

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
  • Gender: Male
    • Sonicsational Audio
Re: Sounds like clipping...but it isn't...
« Reply #11 on: March 20, 2018, 10:01:46 PM »
Another thought - You provided MP3 files for listening and downloading.  Did you record directly to MP3 or WAV?  If you have original WAV files and can post a small clip from one of those, that might be helpful.  There may be one-sided clipping from DC offset for example...
AKG C480B CK61 cards or AKG C568EB or Church CA-11 cards >  Canare L-4E6S with Neutrik EMC > Tascam DR-680 MKII or DR-44WL > memories

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #12 on: March 20, 2018, 10:46:54 PM »
The sound file is the highlighted portion from the waveform I posted above. The sound is most dramatic starting around 4 minutes in.

It’s definitely possible something was off with the turntable, though the sound is still present even after normalizing and removing DC offset. I recorded as WAV. Link to WAV file: https://drive.google.com/open?id=1nUIQf8IFkg1cKwAlPVJRLfRty5h4MWcd

Had the recorder set to LINE and the levels set as low as they would go.

Another possibility that I’m now thinking of is that the recorder was connected to the turntable via RCA plugs with 1/4” adaptors, which could have potentially introduced some sort of problem.
« Last Edit: March 20, 2018, 10:49:21 PM by ycoop »
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline wforwumbo

  • Trade Count: (11)
  • Taperssection Regular
  • **
  • Posts: 186
Re: Sounds like clipping...but it isn't...
« Reply #13 on: March 21, 2018, 11:12:11 AM »
Normalizing and filtering out DC offset won’t always fix this “crunching” issue you’re facing.

While it’s certainly possibly I’m inclined to say it’s not the cables, given how this issue is only at one portion, and this only seems to happen when there’s one passage of lots of low frequency info (bass and kick seem to trigger it) during other already somewhat louder passages.

Do you have automatic gain control turned on? It could have raised your levels for you during a quieter passage then not backed them off during this louder portion, causing the limiters to kick in and brickwalling your recording.

On an unrelated note, glad to see you’re getting usage out of my old DR-40! Seems you’re using it more than I did.
North Jersey native, Upstate veteran, proud Texan

2x Schoeps mk2; 2x Schoeps mk21; 2x Schoeps mk4

4x Schoeps cmc5; 4x Schoeps KC5; Nbob KCY; Naiant PFA

EAA PSP-2

Sound Devices Mixpre-6

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Sounds like clipping...but it isn't...
« Reply #14 on: March 21, 2018, 01:34:54 PM »
It's most prominent starting around 4:00, but I hear that bass distortion all the way through. Does it sound okay playing out through your speakers? Could you maybe try recording out from your amplifier instead of direct from the turntable outs? [EDIT: Actually read the thread from the beginning and realized these were dumb questions under the circumstances...]
« Last Edit: March 21, 2018, 07:27:21 PM by nulldogmas »

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #15 on: March 21, 2018, 03:13:39 PM »
I don’t think I had auto gain control turned on, I’ll check when I’m back home.

I discovered last night that running a high pass filter set to 150 Hz with a 6 dB rolloff per octave removes the crunching sound (it also makes the recording sound like its coming from underwater). I then used the internal mic recording to fill out the treble. Still not 100% satisfied, as people were chattering incessantly like 2 feet from the recorder. Haven’t been able to filter out the chatter without ruining the higher frequencies that are exactly what I’m looking for from that track.

Tonight I’m going to replicate the track, and run the high pass filter at those settings on one version while running a low-pass filter at a few different settings on the other one to see if I can “knock out” the sound. Will report back.
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1626
    • How I Escaped My Uncertain Fate
Re: Sounds like clipping...but it isn't...
« Reply #16 on: March 21, 2018, 07:26:25 PM »
Sorry, reading back, I get the recording situation more clearly now.

It really does sound like the signal from the turntable is at fault, whether that's due to the turntable output itself or the RCA cables. It's possible you brickwalled, if the recorder's input is more sensitive to bass frequencies, maybe. But either way, you accurately recorded a distorted signal.

If the "crunching" is all in the upper frequencies, you could try the high pass filter on the turntable feed and compensate by cranking up the higher frequencies on the mic recording. How that sounds is going to depend on how much of the audience chatter is in the high frequencies, but it's worth a shot.

Offline rumbleseat

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 100
  • Gender: Male
    • Sonicsational Audio
Re: Sounds like clipping...but it isn't...
« Reply #17 on: March 22, 2018, 10:12:18 AM »
I am now thinking that the DR-40 might have been overloaded by low frequency energy.

There's an ominous statement in the DR-40 Reference Manual on page 38 under "Recording an External Device (LINE-IN)":
http://tascam.com/content/downloads/products/872/e_dr-40_rm_vb.pdf

CAUTION
Reduce the output level of the external audio device if the input sound is distorted even when reducing the input gain level on the unit.
When an external audio device with fixed output line level is connected, it would be impossible to control the gain level appropriately because of excessively large input signals.  In such cases, use the headphone jack or other level-controllable output for connection to the unit.


I looked at the spectrum of the WAV clip and during the worst distortion, there's significant energy down to 20 Hz.  Commercially produced music typically doesn't go that low, but synthesized bass certainly can.  And the the PA system would typically roll off those frequencies so they wouldn't wreak havoc with the power amps and main speakers.

So, I think the solution is to keep the lowest frequencies out of your DR-40.
The DR-40 does have a low-cut option, but apparently it only applies to the mics and not the external inputs - too bad.

Parts Express sells a handy assortment of RCA in-line filters that should do the trick:
https://www.parts-express.com/brand/harrison-labs/265

They've got high pass filters at several cutoff frequencies and I'm thinking the 30 Hz High Pass Filter might work.
https://www.parts-express.com/harrison-labs-fmod-inline-crossover-pair-30-hz-high-pass-rca--266-248

They also have 6 and 12 dB attenuators that could solve this problem.
https://www.parts-express.com/harrison-labs-6-db-rca-line-level-audio-attenuator-pair--266-242
https://www.parts-express.com/harrison-labs-12-db-rca-line-level-audio-attenuator-pair--266-244

I don't have any experience with these devices, so I don't have a guess as to which would work best...

Hope this helps!


AKG C480B CK61 cards or AKG C568EB or Church CA-11 cards >  Canare L-4E6S with Neutrik EMC > Tascam DR-680 MKII or DR-44WL > memories

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #18 on: March 22, 2018, 04:30:00 PM »
Thanks for all the input folks, this has been an informative (though horribly frustrating) process. I came up with something border-line listenable last night by running a high pass filter (600 Hz and 12 dB per octave IIRC) to isolate the bass and filling out the treble from the internal mics. Better than nothing, we’ll see what the DJ thinks. I’ll post a clip tonight. Those RCA attenuators look good if I want to record another one of his sets, which he’s going to be doing every month. Don’t have any budget for recording equipment at the moment (waiting for a few months of delayed paychecks from work).

Interesting that the low pass filter removed the noise though.

Also reading that caution statement has me concerned about the inputs being fried again. Well I guess I’ll see how they fare if I manage to get a patch in to someone’s rig at Ghost Light this weekend.

Thanks again for troubleshooting this with me.
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline rigpimp

  • Trade Count: (14)
  • Needs to get out more...
  • *****
  • Posts: 3177
  • Gender: Male
  • Jarts don't kill people!
Re: Sounds like clipping...but it isn't...
« Reply #19 on: March 22, 2018, 05:00:14 PM »
Interesting that the low pass filter removed the noise though.

Are you sure that it was a low pass filter and not a high pass filter?

I have had my Tinybox puke on bass-heavy rap shows.  My results for several were just like what you describe in your OP, crunching distortion but not clipping or brickwalling.  I knew when I could feel the low frequencies vibrating the walls of my digestive system the raw end product was gonna have problems.  Someone here pointed me in the direction of Fabfilter Pro-Q 2 and the problem was solved with a high pass filter and some frequency massaging.

Either way, I am glad that you found approaching the listenable threshold.  Keep playing with it and remember when you are doing repair try little bits at a time and stop.  It is way too easy to get carried away and end up with something really bad.
Mics: Schoeps MK 5 MP, Schoeps MK 8 MP, Schoeps MK 41 MP, KCY 250/5 > PFA
Pre/A>D/P48: Sonosax SX/M2, Sonosax SX/M2-LS, E.A.A. PSP-2, Baby Nbox, Neumann BS48i-2 (for sale)
Recorders: Sound Devices Mixpre-6ii, Sony PCM-A10
Playback: Jolida 1501 Hybrid > McIntosh MX 130 > Von Schweikert VR-4 JR, or Little Dot MK III > Sennheiser HD700
http://archive.org/bookmarks/kskreider
https://www.concertarchives.org/kskreider
https://archive.org/details/thespps

Offline Chilly Brioschi

  • The fool doth think he is wise, but the wise man knows himself to be a fool.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 15433
  • Gender: Male
  • Waiting for the next cladogenetic event, or Godot
    • Oceana North America
Re: Sounds like clipping...but it isn't...
« Reply #20 on: April 18, 2018, 04:01:33 AM »
Today's lesson may well be that an input level control isn't always a pad. (often not)

A good refresher:
https://support.biamp.com/General/Audio/Gain_structure%3A_input_and_output_levels

Glad to hear that you worked through it!
"Peace is for everyone"
        - Norah Jones

"Music is the drug that won't kill you"
         - Fran Lebowitz

Offline ycoop

  • Trade Count: (9)
  • Taperssection Member
  • ***
  • Posts: 647
  • Gender: Male
Re: Sounds like clipping...but it isn't...
« Reply #21 on: April 18, 2018, 04:29:48 AM »
Funny you replied today, I was just checking back in for a link to those in-line RCA attenuators. I’m thinking about buying a pair of the 12 dB ones. I figured those would be more useful to keep around even if they don’t end up solving the problem.

edit: Forgot to ask this before, but why can I only find RCA attenuators and not 1/4" TRS/TS ones?
« Last Edit: April 18, 2018, 06:18:11 AM by ycoop »
Mics: Avantone CK-1s, AT853 c+o
Pres: CA9100
Recorders: DR-60d mkII, DR-2d

Offline Chilly Brioschi

  • The fool doth think he is wise, but the wise man knows himself to be a fool.
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 15433
  • Gender: Male
  • Waiting for the next cladogenetic event, or Godot
    • Oceana North America
Re: Sounds like clipping...but it isn't...
« Reply #22 on: April 21, 2018, 02:03:18 AM »
XLR are the common types for Mic level / board connectors
TRS / TS stuff usually a "Direct Box" level control

Resistors may add noise, and even more so if unbalanced, so take a listen at the floor when using them
"Peace is for everyone"
        - Norah Jones

"Music is the drug that won't kill you"
         - Fran Lebowitz

 

RSS | Mobile
Page created in 0.111 seconds with 51 queries.
© 2002-2024 Taperssection.com
Powered by SMF