Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: balou2 on August 03, 2006, 12:33:36 AM
-
I'm running the R4 in to a 9.6V 5400 NiMH. Problem is that the battery has a stock 2-pin lead on it. I have a 2-pin connector, but I need to have a cable constructed that will have the 2-pin on one side, and the standard R4 connector on the other end. It's a reversed polarity tip, so it would need to be just like the UA-5.
I can pay you, or have parts delivered, or both.
Thanks for the space.
-
I'm running the R4 in to a 9.6V 5400 NiMH. Problem is that the battery has a stock 2-pin lead on it. I have a 2-pin connector, but I need to have a cable constructed that will have the 2-pin on one side, and the standard R4 connector on the other end. It's a reversed polarity tip, so it would need to be just like the UA-5.
I can pay you, or have parts delivered, or both.
Thanks for the space.
$10 worth of parts at radio shack.
the shortest i could find at rs was 6' long, so i hacked it down to make it a more manageable 12".
-
I'm running the R4 in to a 9.6V 5400 NiMH. Problem is that the battery has a stock 2-pin lead on it. I have a 2-pin connector, but I need to have a cable constructed that will have the 2-pin on one side, and the standard R4 connector on the other end. It's a reversed polarity tip, so it would need to be just like the UA-5.
I can pay you, or have parts delivered, or both.
Thanks for the space.
$10 worth of parts at radio shack.
the shortest i could find at rs was 6' long, so i hacked it down to make it a more manageable 12".
Thanks. Can you PM we what would be needed? I do not have a soldering iron at the moment, so was hoping I could get the parts and have someone build one for me.