Become a Site Supporter and Never see Ads again!

Author Topic: RC car batteries with the Denecke AD20 & PS2  (Read 1810 times)

0 Members and 1 Guest are viewing this topic.

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13196
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
RC car batteries with the Denecke AD20 & PS2
« on: March 08, 2005, 12:03:50 AM »
I found 3 RC car batteries, 2000mah, on eBay for $30.00 shipped.  I'd like to use 2 of these to power both my Denecke AD20 & PS2.  I prefer these over the 3000s primarily because they are a little smaller.  If a regular 9v is 650 mah, then I should get at least 3 or 4 2hour shows out of 1 charge.  Correct?  I easily get 2 hours out of a regular set of 9vs.

Questions:

1)  Do these RC batteries get hot when running?

2)  Outside of the required tamiya male connectors, where do I get the actual power connectors for My Deneckes?  Rat Shack adaptaplug?

3)  Anybody run these with their Denecke?  What was your max running time?

I'm tired of buying Duracell 9vs.  Usually costs me about $5.00 a show.  I plan on picking up a smart charger too.

Batteries

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5961120221&fromMakeTrack=true

Smartcharger

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=44022&item=5961903683&rd=1

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13196
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: RC car batteries with the Denecke AD20 & PS2
« Reply #1 on: March 11, 2005, 03:01:29 AM »
Never mind.  Sometimes I have to hear my self think.   ;) 

 

RSS | Mobile
Page created in 0.045 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF