Become a Site Supporter and Never see Ads again!

Author Topic: MixPre -- stuck battery -- ??  (Read 9358 times)

0 Members and 1 Guest are viewing this topic.

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
MixPre -- stuck battery -- ??
« on: April 27, 2008, 02:28:15 PM »
Help. Has anyone ever had a battery stick in the compartment of a MixPre (or similar model)? The battery slides around in there, but gets hung up about a half inch from the threads -- looks like the battery compartment is just every so slightly narrower there. It appears that the battery label is what's doing the hanging. Hmmm....I've tried everything I can think of, and it just doesn't seem to want to come thru that part. I don't remember the battery being tight when I installed it last night.  ::)   I've tried gluing a dowel to the batt and pulling on it, but haven't had much luck so far.

Has anyone ever encountered this before? Any suggestions?   ???
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline JD

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1643
Re: MixPre -- stuck battery -- ??
« Reply #1 on: April 27, 2008, 02:35:14 PM »
You try using one of these? ;D





I think someone here had the same problem not long ago, not sure how they resolved it.
« Last Edit: April 27, 2008, 02:40:02 PM by Jaledu »
Mics: DPA 4022, 4060; Nevaton MC51, MCE400; Gefell sms2000, m20, m21, m27
Pres: DPA MMA6000; Grace V2; Portico 5012; Sonosax SX-M2
Recorders: Edirol R09hr, Sound Devices 722

Offline flipp

  • resident curmudgeon
  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 4285
Re: MixPre -- stuck battery -- ??
« Reply #2 on: April 27, 2008, 04:16:08 PM »


I think someone here had the same problem not long ago, not sure how they resolved it.



http://taperssection.com/index.php/topic,101064.0.html

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #3 on: April 27, 2008, 04:41:58 PM »
Thanks for the link! I thought I remembered seeing something here before, but I didn't have any luck searching.

I was afraid to smack it around too much, but based on the recommendations in the other thread I really layed into it. (Sorta like that Prodigy song, except I can only hope that it didn't "change my pitch up"  >:D) Took quite a bit of violent coaxing and swearing to get the damned thing out of there.

Thanks for the help!!
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline digifish_music

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1016
    • digifish music
Re: MixPre -- stuck battery -- ??
« Reply #4 on: June 05, 2008, 02:35:07 AM »
Thanks for the link! I thought I remembered seeing something here before, but I didn't have any luck searching.

I was afraid to smack it around too much, but based on the recommendations in the other thread I really layed into it. (Sorta like that Prodigy song, except I can only hope that it didn't "change my pitch up"  >:D) Took quite a bit of violent coaxing and swearing to get the damned thing out of there.

Thanks for the help!!

Don't forget to email Sound Devices about this, it's a design flaw.

digifish.
- What's this knob do?

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #5 on: June 06, 2008, 09:19:06 PM »
Good idea. I hadn't thought of that. Thanks.
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline digifish_music

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1016
    • digifish music
Re: MixPre -- stuck battery -- ??
« Reply #6 on: June 08, 2008, 01:03:10 AM »
Good idea. I hadn't thought of that. Thanks.

It happened to me, and three other people including you now on these forums.

digifish
- What's this knob do?

Offline George2

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 312
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #7 on: June 08, 2008, 02:54:49 PM »
Have you tried using quality brand of batteries? Never happened to me. IMHO not a design flaw.
Sennheiser 418s>SDMixPre-D>RO9HR
Beyer MC930>Fostex FM3>NagraSD
Couple of Schoeps CMT441 too.

Offline digifish_music

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1016
    • digifish music
Re: MixPre -- stuck battery -- ??
« Reply #8 on: June 11, 2008, 07:48:54 PM »
Have you tried using quality brand of batteries? Never happened to me. IMHO not a design flaw.

Duracell and Energizer not quality brands?

There is a lip on the inside of the battery tube caused by a narrowing of the tube about 2 cm down from the entrance. If a battery label starts to come off, the battery is slightly fat or damaged (particularly on the end where the cover wraps over the terminal) it can become caught on the lip where it narrows. It most definitely is a design flaw. It's not entirely clear to me what the purpose of the narrowing is, even if they -

1. Enlarged the tube diameter at the end by 1 mm
2. Kept the same diameter all the way down.
3. Changed the angle of the narrowing step (which seems to be about 45 degrees), they would avoid these issues.

BTW: it has only happened to me once too. But once may be a disaster in the field when you are trying to change batteries on an important gig.

digifish
« Last Edit: June 11, 2008, 07:52:34 PM by digifish_music »
- What's this knob do?

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #9 on: June 11, 2008, 08:31:46 PM »
My problem was exactly as digifish described (very slight taper about 2 cm in caused the batts to get stuck). I've been lucky since by avoiding use of the brand of batteries that I had the problem with. I use all rechargables: the stuck ones were Lenmar brand, the ones that have been behaving OK are Sanyos.
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline moooose

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 171
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #10 on: June 12, 2008, 11:08:22 AM »
thank you very much for the useful infos ! I've just bought a mixpre to improve the quality of my field recording....  :)

Offline digifish_music

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1016
    • digifish music
Re: MixPre -- stuck battery -- ??
« Reply #11 on: June 15, 2008, 05:31:03 AM »
thank you very much for the useful infos ! I've just bought a mixpre to improve the quality of my field recording....  :)

You won't regret it. The MixPre is a stunning piece of kit, particularly where low-noise is concerned.

digifish
- What's this knob do?

Offline heehaw

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 31
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #12 on: May 07, 2012, 07:25:00 PM »
have the same problem with my new mixpre-D. The sound devices didn't solve this problem. It's stupid how 800$ machine can stuck with a problem like this. I have a bruise on my hand trying to get the battery out. Maybe try to drill the battery into pieces? But it's not safe. I'm really dissapointed ???
2 x mkh40 > mixpre-d > m10

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: MixPre -- stuck battery -- ??
« Reply #13 on: May 07, 2012, 08:19:09 PM »
I wouldnt drill into the battery. Stuff will ooze out wont it?
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline heehaw

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 31
  • Gender: Male
Re: MixPre -- stuck battery -- ??
« Reply #14 on: May 07, 2012, 09:04:08 PM »
I don't want to drill, it's likely insane, but this just because of my big confusion. :(
maybe just use screwdriver with a little screw into a battery and then catch the battery fast?
2 x mkh40 > mixpre-d > m10

 

RSS | Mobile
Page created in 0.105 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF