Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: jibooer on June 22, 2013, 04:07:09 PM
-
Would like to run via XLR to a R-44. Any experiences or advice? I see lots of people use the tape-out for the smaller bit-buckets in order to combat overloading, but wondering if the R-44 is going to have any issues with a hot signal from the MP-2.
Thx
-
No issues at all- just keep the outer knob of the input gains all the way down and the inner knob about 12 o'clock and adjust the gain
with the mp-2.
-
My experiences with both the R-44 and MP-2.....they can be used together via xlr just fine. I found the MP-2 in any kind of violume situation I ran it with gains turned all the way down and it had plenty of signal. Would depend on how hot your mics run too.
-
thx fellas...peace of mind achieved again