Does anyone know what the ideal voltage setting is on that Naztech for the SD722? I'm guessing 12 but I don't really know since the range is 10-18.
In general (in other words IDK about the 722 in particular), all the volts a device draws but doesn't use get turned into heat. I have a MixPre which specifies 5-18V, and it works fine at 5V, but the power lights don't come on. Sounds fine, but it's unnerving. Quick interwebs search, and the 722 device will actually function below 10, but funny things start happening. That's a long-winded way to say 12 sounds good.
Mics: CA-14(cards & omnis) and CA-11(cards & omnis) ; AT853's(cards, hypers, mini shotguns); Busman BSC-1 (cards, hypers, omnis)
Nakamichi CM300's (CP-1,2,3,4) Nakamichi CM700's (cards, omnis)
Tascam PE-120's (cards, omnis) Peluso CEMC-6 (cards and subcards)
DPA 4061's DPA 4022's
Preamps: CA-9100; Naiant Tinybox (12v/48v + PIP 8V); Naiant Littlebox;
DPA MPS6030; Sound Device Mix Pre-D
Decks: Sony PCM M10; Edirol R-4; Zoom H6; Marantz PMD-661; Sound Devices 722