Become a Site Supporter and Never see Ads again!

Author Topic: aes or spdif  (Read 3230 times)

0 Members and 1 Guest are viewing this topic.

markrsmith

  • Guest
  • Trade Count: (0)
aes or spdif
« on: March 22, 2016, 10:07:37 PM »
Do I use aes or spdif on my ad2k+ > xlr > 702 ?
Thanks mark.

Offline Kindguy

  • Team Bama
  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 6390
  • Gender: Male
Re: aes or spdif
« Reply #1 on: May 02, 2016, 02:45:29 AM »
Do I use aes or spdif on my ad2k+ > xlr > 702 ?
Thanks mark.

I'd go AES. But either will work.
TDS!

DPA 4023> aeta PSP-2> Apogee Mini Me > R-44

http://www.basicallyfrightened.com/

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: aes or spdif
« Reply #2 on: May 02, 2016, 03:25:26 AM »
Do I use aes or spdif on my ad2k+ > xlr > 702 ?
Thanks mark.

I'd go AES. But either will work.

Same here just because its a locking xlr connector, even though they do make locking RCA's as well! I still prefer AES though! YMMV! The difference in resistance[75ohm for SPDIF and 110ohm for AES] doesn't matter at all IMO either!

I cant believe its been since like 2007-ish since I ran a digital input deck[481/3>v3>722]! I used to run 481/3>v3>digital>jb3[2004-2005]/722[2006-2008] back in the day, and that's the last time I ran a digital signal! Crazy its been that long! But it's def nice being able to send 2 channels through one cable like possible with SPDIF/AES >:D 8)
« Last Edit: May 02, 2016, 03:28:48 AM by F.O.Bean »
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline dactylus

  • Site Supporter
  • Trade Count: (62)
  • Needs to get out more...
  • *
  • Posts: 5992
  • Gender: Male
  • Maplewood, MN
Re: aes or spdif
« Reply #3 on: May 02, 2016, 06:08:39 AM »
Do I use aes or spdif on my ad2k+ > xlr > 702 ?
Thanks mark.

I'd go AES. But either will work.

I'd go AES too, for the locking connector.  Your skilled TS cable makers can construct one of these cables for you if you don't already have one.
hot licks > microphones > recorder



...ball of confusion, that's what the world is today, hey hey...

markrsmith

  • Guest
  • Trade Count: (0)
Re: aes or spdif
« Reply #4 on: May 02, 2016, 10:53:32 PM »
Thanks y,all.  I have been using the aes out of the ad2k+ > 702 input.  I like the locking xlr too.

 

RSS | Mobile
Page created in 0.058 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF