Become a Site Supporter and Never see Ads again!

Author Topic: Core HEB pin configuration help.  (Read 1654 times)

0 Members and 1 Guest are viewing this topic.

Offline Church-Audio

  • Site Supporter
  • Trade Count: (43)
  • Needs to get out more...
  • *
  • Posts: 7539
  • Gender: Male
Core HEB pin configuration help.
« on: December 13, 2006, 08:44:34 AM »
Hi does anyone know the pin configuration for the Core HEB 4 pin mini XLR connector?
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline Church-Audio

  • Site Supporter
  • Trade Count: (43)
  • Needs to get out more...
  • *
  • Posts: 7539
  • Gender: Male
Re: Core HEB pin configuration help.
« Reply #1 on: December 14, 2006, 02:34:23 AM »
Come on people someone has to know this :) I just need to know what pins are input and what pins are output.

Chris Church
for warranty returns email me at
EMAIL Sales@church-audio.com

sml42

  • Guest
  • Trade Count: (0)
Re: Core HEB pin configuration help.
« Reply #2 on: December 14, 2006, 05:20:37 AM »
The coresound HEBs are just DPA mics.

I thought coresound used a 5-pin mini-xlr connector? My first pair of DPAs were bought from coresound (never again) and were terminated in mini-xlr. I ended up chopping it off and having the mics re-terminated with microdot connectors.

When I get home from work, I'll have a look to see if I still have the xlr end (possibly not) and will have a look. From memory, only 3 pins were used (common shield, left, right). The cables to the mic bodies are thin coax (signal, shield).

Hope this helps,

stephen

Offline Church-Audio

  • Site Supporter
  • Trade Count: (43)
  • Needs to get out more...
  • *
  • Posts: 7539
  • Gender: Male
Re: Core HEB pin configuration help.
« Reply #3 on: December 14, 2006, 08:24:17 AM »
The coresound HEBs are just DPA mics.

I thought coresound used a 5-pin mini-xlr connector? My first pair of DPAs were bought from coresound (never again) and were terminated in mini-xlr. I ended up chopping it off and having the mics re-terminated with microdot connectors.

When I get home from work, I'll have a look to see if I still have the xlr end (possibly not) and will have a look. From memory, only 3 pins were used (common shield, left, right). The cables to the mic bodies are thin coax (signal, shield).

Hope this helps,

stephen

Its a 4 pin and they are using the shell as a ground. I dont have the mics or the battery box. I just want to double check something.

Thanks for taking the time to check it out for me.

Chris Church
for warranty returns email me at
EMAIL Sales@church-audio.com

sml42

  • Guest
  • Trade Count: (0)
Re: Core HEB pin configuration help.
« Reply #4 on: December 14, 2006, 11:49:24 AM »
Its a 4 pin and they are using the shell as a ground.

In that case, your connector is different to mine.

My mics were wired to be plugged directly into a Mic2496 (which I would advise people to not buy).

I've got the (remains of) the connector in front of me. It is definately a 5-pin mini-xlr. Pins 2, 3 and shield/shell of the mini-xlr are unconnected. Pin 5 is common ground for the mics (the coax shield on the DPA cables). Pins 1 and 4 are signal left/right although I can't say which way round (coax core on the DPA cables).

Sorry if that hasn't been any help...

best regards,
stephen

Offline Church-Audio

  • Site Supporter
  • Trade Count: (43)
  • Needs to get out more...
  • *
  • Posts: 7539
  • Gender: Male
Re: Core HEB pin configuration help.
« Reply #5 on: December 14, 2006, 12:14:39 PM »
Its a 4 pin and they are using the shell as a ground.

In that case, your connector is different to mine.

My mics were wired to be plugged directly into a Mic2496 (which I would advise people to not buy).

I've got the (remains of) the connector in front of me. It is definately a 5-pin mini-xlr. Pins 2, 3 and shield/shell of the mini-xlr are unconnected. Pin 5 is common ground for the mics (the coax shield on the DPA cables). Pins 1 and 4 are signal left/right although I can't say which way round (coax core on the DPA cables).

Sorry if that hasn't been any help...

best regards,
stephen

A customer of mine has a 4 pin connector hardwired to her DPA mics. Strange I guess they ran out of 5 pin connectors.
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline Church-Audio

  • Site Supporter
  • Trade Count: (43)
  • Needs to get out more...
  • *
  • Posts: 7539
  • Gender: Male
Re: Core HEB pin configuration help.
« Reply #6 on: January 18, 2007, 11:44:37 AM »
Problem solved.

Chris Church
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7646
Re: Core HEB pin configuration help.
« Reply #7 on: January 18, 2007, 12:41:05 PM »
mine terminates to the 4 pin, too - i think that is standard with the cs batt box...

did you figure it out..? do you care to post the info for the rest of us..?

tia

+t
-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

Offline Church-Audio

  • Site Supporter
  • Trade Count: (43)
  • Needs to get out more...
  • *
  • Posts: 7539
  • Gender: Male
Re: Core HEB pin configuration help.
« Reply #8 on: January 18, 2007, 01:23:38 PM »
mine terminates to the 4 pin, too - i think that is standard with the cs batt box...

did you figure it out..? do you care to post the info for the rest of us..?

tia

+t

I am really sorry, I did figure it out and built a preamp for a user here and I did not write the config down. It's very easy to figure out if you have the mics. Ground is the case of the connector pin 1 is mic 1, pin 2 is out 2, pin 3 is mic 2, pin 4 is out 2 Its paired like that.

Chris Church
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline taug

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 15
Re: Core HEB pin configuration help.
« Reply #9 on: October 07, 2016, 11:59:24 AM »
Sorry, I know this is an old thread...



I am really sorry, I did figure it out and built a preamp for a user here and I did not write the config down. It's very easy to figure out if you have the mics. Ground is the case of the connector pin 1 is mic 1, pin 2 is out 2, pin 3 is mic 2, pin 4 is out 2 Its paired like that.

Chris Church

Is this the pin numbering scheme for the 4-pin mini XLR connector?


 

RSS | Mobile
Page created in 0.158 seconds with 32 queries.
© 2002-2017 Taperssection.com
Powered by SMF
Website Design by Foxtrot Media, Inc., a Baltimore Website Company