Become a Site Supporter and Never see Ads again!

Author Topic: SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>  (Read 8935 times)

0 Members and 1 Guest are viewing this topic.

Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« on: October 09, 2003, 10:15:08 AM »
i have a question.  We have been recording our shows with an audience recording with this source:

Rode Stereo Condensor Mics (we dont' have the money for schoeps) >
2 presonus Preamps >
Behringer ultagraph pro-dual 31 band EQ >
Behringer Compressor >
CD burner


that works fine for an aud recording, but at venues where we run a full SBD i want to get a good SBD recording.  i have been just going from the RCA jacks out of the board into my minidisc player...but that sounds like shit.  

some people have told me to get the NOMAD Jukebox 3.  I can't afford a DAT or a laptop right now.  should i get a D/A converter and get the NOMAD?

what do you recommend?

jct@bossys.com

Offline gonads

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 398
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #1 on: October 09, 2003, 10:24:59 AM »
why the compressor?
My Attitude Sucks

Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #2 on: October 09, 2003, 10:38:59 AM »
i don't know...we had one, decided to throw it into the source....i'm not worried about the audience recording...that's just for us to listen to ...

i am worried about gettting QUALITY SBD recordings at the venues where we run everything thru the board and it's mixed right.  

this is what the audience sounds like:  www.bumpgroove.com/music.htm


Offline gonads

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 398
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #3 on: October 09, 2003, 10:43:32 AM »
why not run rca into the cd burner?

To go with a JB3 you need to get an a/d with optical out and a jb3. Why not just buy a d8? That would be cheaper and the quality will be the same as the JB3.
My Attitude Sucks

Offline Matt Quinn

  • No Ceilings
  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2471
  • Gender: Male
  • beep boop
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #4 on: October 09, 2003, 10:45:36 AM »
He can't afford a DAT.

Hi JC- I'm here too. This is thetube on PT.
In: AT853>PMD620
Out: PC>MOTU Ultralite AVB>M-Audio BX8a/Grace m900

DAW: Ableton Live 10

My LMA Recordings

Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #5 on: October 09, 2003, 10:46:18 AM »
yeah, but then i would have to spend money on the dat tapes and what not.   how much does an UA-5 cost?  couldn't i go SBD rcas > UA5 >digitally > JB3?


Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #6 on: October 09, 2003, 10:49:15 AM »
thetube...you're all over the boards huh?  yeah, i have a show on 10/24 that i really want to get a sick SBD recording for and be able to convert it to shn/flac easily.  the md route i have been taking isn't working well (conversion to cd isn't easy for me, and i feel i lose quality with the MD)

i can't afford a dat...i can afford a 175 jb3 on ebay right now, just want to know how much a UA-5 will cost?  and will it be the digital coverter i need so that i don't need to fuck with the recorder levels?  isn't that what digital is for?

Offline gonads

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 398
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #7 on: October 09, 2003, 10:52:17 AM »
He can't afford a DAT.

Hi JC- I'm here too. This is thetube on PT.

 ::)

but he can afford an a/d and a jb3?

an a/d and jb3 would be more expensive than a dat.
My Attitude Sucks

Offline gonads

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 398
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #8 on: October 09, 2003, 10:54:53 AM »
yeah, but then i would have to spend money on the dat tapes and what not.   how much does an UA-5 cost?  couldn't i go SBD rcas > UA5 >digitally > JB3?



sure you can. A digimod UA5 is $350, and a JB3 is $200...
My Attitude Sucks

Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #9 on: October 09, 2003, 11:05:09 AM »
well....i am not knocking DAT...it's just not the route i want to take.  I dont' want an archive of 100's of tapes (i already have that with phish tapes)...i'd rather archive our shows on HD's.  

The jb3 stores 20gigs right? that's about 15 of our shows in flac.  music123.com has the edirol ua-5 for 225...the jb3 is 175 on ebay.  

i just want to know would that work and would it be want you recommend if you weren't going DAT/laptop?  

Offline Joe w.

  • esniper
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5034
  • Gender: Male
  • Turn JB Up
2016 National Champions
five generations with an unlocked door and a loaded burglar alarm

Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #11 on: October 09, 2003, 11:24:23 AM »
thanks...that's a good FAQ

Offline gonads

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 398
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #12 on: October 09, 2003, 11:34:18 AM »
well....i am not knocking DAT...it's just not the route i want to take.  I dont' want an archive of 100's of tapes (i already have that with phish tapes)...i'd rather archive our shows on HD's.  

The jb3 stores 20gigs right? that's about 15 of our shows in flac.  music123.com has the edirol ua-5 for 225...the jb3 is 175 on ebay.  

i just want to know would that work and would it be want you recommend if you weren't going DAT/laptop?  

that's fine. I was just pointing out that a/d->jb3 isn't really anymore economical than DAT. Also you can just reuse the dats after you transfer them into flacs.

FYI - the jb3 does not store flac's.
My Attitude Sucks

Offline jctibbitts

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
  • Support Michigan Music: Bumpgroove.com
    • BUMP
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #13 on: October 09, 2003, 11:38:35 AM »
yeah...i meant wav...i'd put them to flac/shn on the hd....thanks

Offline gonads

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 398
Re:SBD TAPERS...I NEED YOUR HELP>>>>>>>>>>>
« Reply #14 on: October 09, 2003, 11:43:59 AM »
good luck!

jb3 is a sweet little recorder for sure...
My Attitude Sucks

 

RSS | Mobile
Page created in 0.098 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF