Become a Site Supporter and Never see Ads again!

Author Topic: Baby N Box into A10 question  (Read 3041 times)

0 Members and 1 Guest are viewing this topic.

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
Baby N Box into A10 question
« on: September 19, 2022, 10:18:13 PM »
OK, apologies if this is a dumb question, but I've seen a few different opinions on this in the forum I believe...

I just received my Baby N Box and plan to test it out tomorrow night at a loud show (Boris & Nothing) running into an A10 (with MK4's and Nbob cable). Should I run the A10 input as "audio in" or "mic in"?

I did a quick test here at home with my stereo and I had the gain maxed out on the A10 to get somewhat reasonable signal on the recorder, but of course that's different than a live music club environment. That said, I'm not used to having no mic preamp gain, so this feels a little odd.   :shrug:  Just looking to make sure I don't screw up the recording tomorrow.   ;D

Cheers,
jason
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline DavidPuddy

  • Trade Count: (18)
  • Taperssection All-Star
  • ****
  • Posts: 1800
  • If it's too loud, turn it down.
Re: Baby N Box into A10 question
« Reply #1 on: September 20, 2022, 01:57:53 AM »
I usually use audio in with no issues, starting around level 7 or so and adjusting from there
Mics: mk4v/mk41v/mk22 > CMC1L/Nbobs, 4061, MKE2
Preamps: Mixpre-D, Nbox Platinum ABS
Recorders: Mixpre-6 ii, PCM-A10

mountainhop

  • Guest
  • Trade Count: (0)
Re: Baby N Box into A10 question
« Reply #2 on: September 20, 2022, 03:36:55 AM »
I usually use audio in with no issues, starting around level 7 or so and adjusting from there

this. id say start around 10 or so on audio in... same advice essentially

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
Re: Baby N Box into A10 question
« Reply #3 on: September 20, 2022, 09:25:29 AM »
Awesome. Thank you both!
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline guitard

  • Trade Count: (8)
  • Needs to get out more...
  • *****
  • Posts: 3703
Re: Baby N Box into A10 question
« Reply #4 on: September 21, 2022, 11:16:07 AM »
As others have said - use audio in.  This is especially true for loud shows.

You probably already know this, but one thing to look out for - the "audio in" & "mic-in" options will pop up when you plug the 1/8" cable from the Baby Nbox into the A10.  The default when it pops up is "audio-in."  Just be careful it doesn't somehow get set for "mic-in" because at a loud show, you will overload the A10, and no amount of reducing the input will help.  In other words, you can go as low as 1 on the input, and it will still be overloading.
Mics: Schoeps MK41s & MK41Vs >:D
Pre-amps: BabyNbox & Platinum Nbox
Deck: Sony A10

Video: Canon HF G70 (4K), Sony FDR AX100 (4K), Pany ZS100 (4K)
Photo: Canon EOS 7D w/ Canon EF 70-200mm f/2.8L is III USM

A/V software: Sony Vegas Pro 18 (build 527) 64 bit / DVD Architect Pro 6.0 (build 237)

Offline dmonkey

  • Trade Count: (7)
  • Taperssection All-Star
  • ****
  • Posts: 1087
  • Gender: Male
Re: Baby N Box into A10 question
« Reply #5 on: September 21, 2022, 07:57:03 PM »
Thanks to all for the input.

Audio in, gain around 11 last night -- worked like a charm. And it was pretty loud.

Loving the form factor and simplicity of this thing.

Cheers!
MK4's, KM140's or MC930's >  Tinybox or Aerco MP-2 > R-09, M-10, R-44 (Oade CM) or MixPre-6

Offline loughney

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 295
    • YouTube show clips
Re: Baby N Box into A10 question
« Reply #6 on: January 27, 2023, 09:42:55 PM »
Thanks to all for the input.

Audio in, gain around 11 last night -- worked like a charm. And it was pretty loud.

Loving the form factor and simplicity of this thing.

Cheers!
Which thing, the A10 or the Baby N Box or both?

 

RSS | Mobile
Page created in 0.094 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF