Become a Site Supporter and Never see Ads again!

Author Topic: 1/4 UA-5 > M1  (Read 3862 times)

0 Members and 1 Guest are viewing this topic.

Offline MarkDavidson218

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 93
  • Gender: Male
1/4 UA-5 > M1
« on: July 10, 2004, 03:13:27 PM »
Hey,
I'm going to get the digi mod sooner or later, but for right now I'm going to have to go 1/4 out of the UA-5 in to the M1. Do they make 1/4 right angle that would then plug in to the M1. Any help would be great!

Thanks,
Mark
mc012> ua-5 > G4 or m1

Offline MarkDavidson218

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 93
  • Gender: Male
1/4 UA-5 > M1
« Reply #1 on: July 10, 2004, 03:15:23 PM »
Hey,
I'm going to get the digi mod sooner or later, but for right now I'm going to have to go 1/4 out of the UA-5 in to the M1. Do they make 1/4 right angle that would then plug in to the M1. Or could I make a pair that would work? Any help would be great!

Thanks,
Mark
mc012> ua-5 > G4 or m1

Offline sexymexi

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1777
  • Gender: Male
    • show list
Re: 1/4 for UA-5>m1...
« Reply #2 on: July 10, 2004, 03:37:24 PM »
i think you'd need to get, or make a cable, if you want both right angles, that wouldn't be too tough.  I just made some right angle speaker cables with 1/4 right angles.  Its easy, you could probably get them at either radio shack, or go to a guitar store, but you could use a cat5 cable, and solder the tip/ground on the 1/4 in peices, and have that terminate into an 1/8 in stereo mini plug.  i don't know how tough the mini plug would be to solder, but if all else fails get an old pair of headphones and hack the end off and use the existing wire in that.  Good luck man, and welcome to ts.com.

Matt
AKG 391's > phantom boxes > JB3 or Casio DA-7
Panasonic WM1610 omni's > whatever

Playback: Soundblaster Audigy 2 ZS Platinum > Onkyo TSDX595 > matched Oynix Rockets > Mirage FRX-S8 sub

Offline leegeddy

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1953
  • Gender: Male
Re: 1/4 for UA-5>m1...
« Reply #3 on: July 10, 2004, 04:14:58 PM »
Hey,
I'm going to get the digi mod sooner or later, but for right now I'm going to have to go 1/4 out of the UA-5 in to the M1. Do they make 1/4 right angle that would then plug in to the M1. Any help would be great!

Thanks,
Mark

mark;

i'd be happy to make some custom cables to suit your needs. i've made custom cables for several folks here and nothing's blown up yet....so that's good news so far :)

i mainly use quality cables and terminators like Canare, Mogami, Belden, Neutrik, etc.

pm me if you're interested.

marc
"I'm a taper, he's a taper. Wouldn't you like to be a taper too?"
"Mics? What mics? This is my hat."

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: 1/4 for UA-5>m1...
« Reply #4 on: July 10, 2004, 04:46:34 PM »
Marc's cables are sweet, he made me some 1/4" > rca and 1/4" > 1/8" mini cables so i can take patchers with my 410! super sweet cables!

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: 1/4 for UA-5>m1...
« Reply #5 on: July 10, 2004, 06:01:51 PM »
Why not just run RCAs out of the UA5 into the M1?  You can pick up a 2 x RCA > stereo mini adapter easily and cheaply enough at RS.  Of course, you could make either or both ends of the RCA/stereo mini right-angle as well.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline caymanreview

  • Trade Count: (22)
  • Needs to get out more...
  • *****
  • Posts: 9849
  • Gender: Male
    • shows ive taped  that are in circulation
Re: 1/4 for UA-5>m1...
« Reply #6 on: July 10, 2004, 06:03:33 PM »
Why not just run RCAs out of the UA5 into the M1?  You can pick up a 2 x RCA > stereo mini adapter easily and cheaply enough at RS.  Of course, you could make either or both ends of the RCA/stereo mini right-angle as well.

excellent point!

Offline leegeddy

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1953
  • Gender: Male
Re: 1/4 for UA-5>m1...
« Reply #7 on: July 10, 2004, 06:43:11 PM »
Marc's cables are sweet, he made me some 1/4" > rca and 1/4" > 1/8" mini cables so i can take patchers with my 410! super sweet cables!

thanks D!  may your future patchers be happy.

marc
"I'm a taper, he's a taper. Wouldn't you like to be a taper too?"
"Mics? What mics? This is my hat."

Offline dklein

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1184
  • Gender: Male
Re: 1/4 for UA-5>m1...
« Reply #8 on: July 12, 2004, 10:36:51 AM »
Why not just run RCAs out of the UA5 into the M1?  You can pick up a 2 x RCA > stereo mini adapter easily and cheaply enough at RS.  Of course, you could make either or both ends of the RCA/stereo mini right-angle as well.
ditto - they are the same output - both unbalanced so it's really just a choice of connectors.  And RCAs are usually so short you don't need to bother with right angles because there's usually something else sticking out more!
KM 184 > V2 > R4
older recording gear: UA-5  / emagic A62 / laptop / JB3 / CSB / AD20 / Sharp MT-90 / Sony MDS-JE510
Playback: Pioneer DV-578 > Lucid DA 9624 >many funny little british boxes > Linn Isobarik PMS

 

RSS | Mobile
Page created in 0.073 seconds with 37 queries.
© 2002-2024 Taperssection.com
Powered by SMF