Become a Site Supporter and Never see Ads again!

Author Topic: Nak CM300 into a 702? Next Question?  (Read 3680 times)

0 Members and 1 Guest are viewing this topic.

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Nak CM300 into a 702? Next Question?
« on: January 17, 2009, 12:46:51 PM »
Has anyone used this combination? I recently pick up a pair of nice cm300's.  What is the  best way to run these.  Through the mic pre's with phantom turned off or through the pre's switched to line input and adjust gain that way?

an inquiring mind wants to know?

Peace  ;D OOK
« Last Edit: January 19, 2009, 07:38:02 PM by OtheroneK »
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline Kyle

  • Made it back alive!
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2169
  • Gender: Male
  • Still loves his mic pre's
Re: Nak CM300 into a 702?
« Reply #1 on: January 17, 2009, 12:55:58 PM »
Mic-in with +48 turned OFF. Use your round 9v batteries for the Nak's and you are off and running..
Schoeps CMC6/MK4  //  Nakamichi CM-300/CP-1/CP-2
E.A.A. PSP-2   // Grace Design Lunatec V2
Sonic AD2K+ 
Tascam HD-P2 (Oade BCM)  //  Sony TC-D5 PROII
 
Duncan - 12/84 > 8/8/05 - Miss you everyday

Offline run_run_run

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 5253
  • Gender: Male
Re: Nak CM300 into a 702?
« Reply #2 on: January 19, 2009, 01:24:12 PM »
I support this plan. Just don't fry them with phantom.  On the LMA there is this 300 Gun ~> V3 ~> 7XX source that is smokin.

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: Nak CM300 into a 702? next question?
« Reply #3 on: January 19, 2009, 07:37:19 PM »
next question?  -10db pad on or off?
 ;D
Peace OOK
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline SmokinJoe

  • Trade Count: (63)
  • Needs to get out more...
  • *****
  • Posts: 4210
  • Gender: Male
  • "75 and sunny"... life is so much simpler.
    • uploads to archive.org
Re: Nak CM300 into a 702? Next Question?
« Reply #4 on: January 19, 2009, 10:32:49 PM »
Definitely no pad required.  Naks are a relatively low output mic, so you need gain.
Mics: Schoeps MK4 & CMC5's / Gefell M200's & M210's / ADK-TL / DPA4061's
Pres: V3 / ST9100
Decks: Oade Concert Mod R4Pro / R09 / R05
Photo: Nikon D700's, 2.8 Zooms, and Zeiss primes
Playback: Raspberry Pi > Modi2 Uber > Magni2 > HD650

Offline run_run_run

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 5253
  • Gender: Male
Re: Nak CM300 into a 702? Next Question?
« Reply #5 on: January 20, 2009, 04:54:18 PM »
Definitely no pad required.  Naks are a relatively low output mic, so you need gain.
:lol: you would only need the pad for like death metal. 

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: Nak CM300 into a 702? Next Question?
« Reply #6 on: January 20, 2009, 05:04:54 PM »
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline run_run_run

  • Trade Count: (7)
  • Needs to get out more...
  • *****
  • Posts: 5253
  • Gender: Male
Re: Nak CM300 into a 702? Next Question?
« Reply #7 on: January 20, 2009, 05:16:08 PM »
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK
cool let us know how it goes.  Omnis up front can be pretty bad ass

Offline Gil

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 6787
  • Gender: Male
Re: Nak CM300 into a 702? Next Question?
« Reply #8 on: January 21, 2009, 02:31:10 PM »
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.
« Last Edit: January 21, 2009, 02:32:56 PM by Porno Gil »
"Let's go do some crimes."

"To his mind, an opportunity to insult a successful ape came from the hand of Providence."

Teac ME-80(cards & omnis), AT943(hypers)>Tascam DR-2d

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: Nak CM300 into a 702? Next Question?
« Reply #9 on: January 21, 2009, 04:17:56 PM »
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.

Yeah I seem to remember something about this......you need to get back east man.....or I need to get west...

Didn't you have a oh sh** moment that night....... >:D
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

Offline Gil

  • Trade Count: (5)
  • Needs to get out more...
  • *****
  • Posts: 6787
  • Gender: Male
Re: Nak CM300 into a 702? Next Question?
« Reply #10 on: January 21, 2009, 04:21:47 PM »
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.

Yeah I seem to remember something about this......you need to get back east man.....or I need to get west...

Didn't you have a oh sh** moment that night....... >:D

Absolutely. You need to keep me posted about Jazz Cafe shows. Everything but Moon Boot flies under my radar. And there's always a place to crash in the burgh for you.

I thought I did. Recovered nicely though  ;D
"Let's go do some crimes."

"To his mind, an opportunity to insult a successful ape came from the hand of Providence."

Teac ME-80(cards & omnis), AT943(hypers)>Tascam DR-2d

Offline OOK

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 2727
  • Gender: Male
  • formerly OtherOneK
Re: Nak CM300 into a 702? Next Question?
« Reply #11 on: January 21, 2009, 04:39:54 PM »
Thanks all.....first outing will be Gongzilla at the Jazz Cafe, NAK omni's 3' from stage/PA,  2 ROC........It will be loud but certainly not death metal......

Peace OOK

I feel as if I've seen a similar setup for Gongzilla/WWP there  :P  ;D

I've never needed the -10 db pad, but it always seems (to me) that the omnis run a bit hotter than the cards. I have nothing scientific to back this up, just a couple of experiences where I said, "holy shit these levels are way higher than usual!"  ;D

cool let us know how it goes.  Omnis up front can be pretty bad ass

Oh, they are. My Willie Waldman Project tape from that very spot is pretty smokin'.

Yeah I seem to remember something about this......you need to get back east man.....or I need to get west...

Didn't you have a oh sh** moment that night....... >:D

Absolutely. You need to keep me posted about Jazz Cafe shows. Everything but Moon Boot flies under my radar. And there's always a place to crash in the burgh for you.

I thought I did. Recovered nicely though  ;D

Will do............
DPA/HEB 4060's > R09HR
MBHO648/KA100Lk/KA200/KA300/KA500 > SD702

 

RSS | Mobile
Page created in 0.068 seconds with 40 queries.
© 2002-2024 Taperssection.com
Powered by SMF