Become a Site Supporter and Never see Ads again!

Author Topic: CA 9200 sending mono signal?  (Read 3424 times)

0 Members and 1 Guest are viewing this topic.

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2044
CA 9200 sending mono signal?
« on: November 24, 2013, 09:41:17 PM »
A friend has the CA-9200 and used a stereo cable to run into Sony M10 (line in) and he's getting mono, even when isolating one microphone. Normally just that one channel should be showing sound but both are, as if it's mono. Any idea what's up?

Offline Phil Zone

  • Trade Count: (22)
  • Taperssection All-Star
  • ****
  • Posts: 1037
  • Gender: Male
Re: CA 9200 sending mono signal?
« Reply #1 on: November 24, 2013, 10:12:48 PM »
is the m10 set to record mono?
Microphones: AKG 460B, 480B, Naiant Actives,CK61,CK62,CK63, CK69, Busman BSC-1, CA-14
Preamps: (3) Naiant Littlebox, Naiant Tinyhead
Recorders: (2) Zoom F6, Tascam DR-05

LMA Shows: http://archive.org/search.php?query=taper%3A%22Cam%20Keough%22&sort=-date

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2044
Re: CA 9200 sending mono signal?
« Reply #2 on: November 24, 2013, 10:32:05 PM »
Is mono an option on the M10?

Also, he used the CA mics straight into the M10 and was able to get stereo.

Offline Phil Zone

  • Trade Count: (22)
  • Taperssection All-Star
  • ****
  • Posts: 1037
  • Gender: Male
Re: CA 9200 sending mono signal?
« Reply #3 on: November 24, 2013, 10:51:20 PM »
Hmm, try a different cable if you haven't already. I'm sure Chris will chime in. Try fiddling with the gain on the 9200. Also, try the mic input as well as the line, maybe the line input is bad...
Microphones: AKG 460B, 480B, Naiant Actives,CK61,CK62,CK63, CK69, Busman BSC-1, CA-14
Preamps: (3) Naiant Littlebox, Naiant Tinyhead
Recorders: (2) Zoom F6, Tascam DR-05

LMA Shows: http://archive.org/search.php?query=taper%3A%22Cam%20Keough%22&sort=-date

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2044
Re: CA 9200 sending mono signal?
« Reply #4 on: November 24, 2013, 11:28:18 PM »
Thanks for the suggestions. I'll have my friend try a few thigns. He did try a different cable and the result was the same.

Offline Church-Audio

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 7571
  • Gender: Male
Re: CA 9200 sending mono signal?
« Reply #5 on: November 25, 2013, 01:44:21 PM »
Thanks for the suggestions. I'll have my friend try a few thigns. He did try a different cable and the result was the same.
I would send the unit to me for evaluation have your friend contact me. I would double check the cable as well and try sending a stereo source into the input like something from an ipod or cd player. Listen back on headphones you can tell if its stereo or not. If it is than the problem is with the preamp.

Chris
for warranty returns email me at
EMAIL Sales@church-audio.com

Offline vwmule

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 2044
Re: CA 9200 sending mono signal?
« Reply #6 on: November 25, 2013, 02:34:31 PM »
Thanks for the reply, Chris. I'm sending this to my friend.

 

RSS | Mobile
Page created in 0.043 seconds with 31 queries.
© 2002-2024 Taperssection.com
Powered by SMF