Become a Site Supporter and Never see Ads again!

Author Topic: Naiant Tinybox  (Read 3045 times)

0 Members and 1 Guest are viewing this topic.

Offline harmon712

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 193
  • Gender: Male
    • Photography and Audio Recording Facebook Page
Naiant Tinybox
« on: January 10, 2014, 11:11:32 PM »
What would the right Tinybox setup be with Busman BSC1?

Mics: Neumann KM184 & Busman BSC1
Recorders: Sound Devices MixPre-3 & MixPre-6
Stand: Triad-Orbit T3 w/ T-ES Elevator Shaft
Video: Canon VIXIA HF R500
Photo: Canon T3i w/ Sigma 18-50mm & 50-150 f/2.8 lenses
Bag: Gruv Gear Club Bag, AmazonBasics Large DSLR Gadget Bag & Sound Devices CS-3

Offline Fatah Ruark (aka MIKE B)

  • Trade Count: (11)
  • Needs to get out more...
  • *****
  • Posts: 9938
  • Gender: Male
  • I dream in beige.
    • sloppy.art.ink
Re: Naiant Tinybox
« Reply #1 on: January 10, 2014, 11:19:03 PM »
For my Tinybox I contacted Jon directly via the email link on his website. He is very helpful.
||| MICS:  Beyer CK930 | DPA 4022 | DPA 4080 | Nevaton MCE400 | Sennheiser Ambeo Headset |||
||| PREAMPS: DPA d:vice | Naiant Tinybox | Naiant IPA |||
||| DECKS: Sound Devices MixPre6 | iPod Touch 32GB |||
|||Concert History || LMA Recordings || Live YouTube |||

colinw

  • Guest
  • Trade Count: (0)
Re: Naiant Tinybox
« Reply #2 on: January 11, 2014, 01:48:44 AM »
I run busman bsc1 mics with my Tinybox. Jon made me a cable that has a pair of regular XLR cables for the mic end and a single mini xlr into the Tinybox. The Tinybox output is 3.5mm out so I just a short cable to go 3.5mm in to the line in on my tascam dr2d. The Tinybox and cable provide the phantom power the mics need. The Tinybox is a basic one with the regular high/med/low settings.
This setup works really well for me, I love it.

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Naiant Tinybox
« Reply #3 on: January 11, 2014, 08:25:28 AM »
I run busman bsc1 mics with my Tinybox. Jon made me a cable that has a pair of regular XLR cables for the mic end and a single mini xlr into the Tinybox. The Tinybox output is 3.5mm out so I just a short cable to go 3.5mm in to the line in on my tascam dr2d. The Tinybox and cable provide the phantom power the mics need. The Tinybox is a basic one with the regular high/med/low settings.
This setup works really well for me, I love it.
correct
The "normal" tinybox with xlr/48v adaptor cable is all you need
I personally would be sure it's wired to work with other options though such as plug. In mics and or actives
You don't need to buy those adaptor cables if you don't have those types of mics but it will give you options down the road and increase the ability to resell it if you ever lose your mind
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

 

RSS | Mobile
Page created in 0.033 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF