Become a Site Supporter and Never see Ads again!

Author Topic: question re: level knob on old sp-spsb mini 9v battery box  (Read 2728 times)

0 Members and 1 Guest are viewing this topic.

Offline red

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 105
question re: level knob on old sp-spsb mini 9v battery box
« on: January 12, 2014, 09:57:49 PM »
I'm hoping someone can help with my question.  I have an old sp-spsb-# (?) mini 9v battery box I picked up a long time ago for pennies in the yard sale.  (I'm not sure of the correct #, the seller id'd it as a sp-spsb-3).  It has a level control knob like the one pictured here:  http://www.soundprofessionals.com/mas_assets/full/SP-SPSB-2.jpg

I will probably run this into my Tascam dr2d, and don't want to use the battery box level controls - so practically speaking, does this mean I turn them all the way "up" as far as they go, or "down" as far as they go?  Thanks in advance for any advice.

Offline fmaderjr

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1966
Re: question re: level knob on old sp-spsb mini 9v battery box
« Reply #1 on: January 12, 2014, 10:19:16 PM »
Turn the control all the way up-the control only provides attenuation. No amplification.
AT853's (all caps)/CM-300 Franken Naks (CP-1,2,3)/JBMod Nak 700's (CP-701,702) > Tascam DR-680
Or Sonic Studios DSM-6 > M10

Offline red

  • Trade Count: (1)
  • Taperssection Regular
  • **
  • Posts: 105
Re: question re: level knob on old sp-spsb mini 9v battery box
« Reply #2 on: January 16, 2014, 10:23:34 PM »
thank you!

 

RSS | Mobile
Page created in 0.044 seconds with 27 queries.
© 2002-2024 Taperssection.com
Powered by SMF